10 sets Mini Micro Sh 1.0 Jst 2-pins connector stekker mannelijk met 100Mm kabel & vrouwelijk

Funcionan y son la alternativa barata y sencilla a tener que crimpar tú el conector al cable (suerte con ello siendo tan pequeños). He usado el conector macho con cable para hacer un empalme a un ventilador Sunon MF60151V31000UA99 y poderlo conectar así a la placa de una PS2 fat. Es justo lo que necesitaba para eso porque el ventilador no traía el conector. Lástima que no haya un lote con menos cantidad de conectores y cables...

Stecker und Kabel waren gut verarbeitet. Sind zwar aus meiner Sicht nicht ganz das Original aber passen zum System. Günstiger geht glaube ich nicht und würde ich mir jederzeit wieder kaufen.

Purtroppo ho letto male, di fretta, e li ho ordinati di una misura nettamente più piccola rispetto a quel che mi occorre. Non ho chiesto la sostituzione perchè mi sarebbe costata quasi quanto il prodotto stesso. Ad ogni modo, rispecchiano quanto specificato nella descrizione, dal venditore.

I have a Logitech mini size mouse (I believe it's a M150), it takes two AA cells to power it.Being a laptop mouse it got lost as they tend to do in my house and the batteries leaked and corroded the terminals.I bought here the end terminals and had to resolder the lead with one of these micro JST plugs on the end.Having had a spare lead in my box, I was disappointed to see it wouldn't fit, it turned out to be 1.25mm pitch as opposed to the 1mm shown here in the photo.Without photographing close up, the plugs on the 1.25mm and 1mm look the same, it was only after I tried the 1.25mm with no success was when I realised that I needed a 1mm pitch cable.Save yourself some hassle and get a packet of each if you're in a hurry, otherwise measure as I've done to get a heads up.It's only photographing the two together that you see the difference, I'll post a photo of the 1.25mm when I can find it, next to the 1mm.I should say also that the 1.25mm lead has a visually different plug on it, again, I can't find it right now, but will post pics of both so you can see.Result: a working mouse again for a few pounds and not £30-£50 and less wastage!

bien