100M/1000M/2.5G NIC Network Card, dual RJ-45 Port, with Realtek RTL8125BG Controller, Support Windows/Windows Server/Linux/Ubuntu/Centos/Vmware

Réseau ethernet ok.Mettre le driver Realtek à jour depuis le site

Funziona perfettamente, non registra inconvenienti. Ottimo per il prezzo conveniente. Lo consiglio

Die Ausführung der Order kann man wirklich nicht bemängeln.Das PCB ist in Ordnung, da habe ich welten schlechteres bei Amazon bekommen.Schwämmchen für die Pins, Kugeln gegen den Regen, bruchsicher eingepackt, sollte normal sein, scheint aber nicht so.Das beigelegte Kabel ist zwar nicht 100% ideal und der zip tie etwas fummelig aber dafür gut isoliert, geeignet für den internen Verbau, wofür es ja gedacht ist. Entsprechend kein Blinklicht-Kabel für die Pins.Dennoch große und kurze Slotblende, schrauben und eine Nummer besser als der übliche Schraubendreher dabei.Stecker kann man nichts falsch machen, da ein Pin "fehlt", entsprechend am Stecker der Platz "zu " ist.Was möchte man mehr, ach ja, funktioniert es?Ja, die Karte kann ihre 2,5 gbit erreichen - Default aber zumindest hier noch keine Top-Leistung.Fairerweise habe ich zunächst aber nur schnell in meinem Prototyp getestet => pcie2 mainboard mit pcie auf mpcie adapter.root@CM3588:~# iperf3 -c 192.168.66.101Connecting to host 192.168.66.101, port 5201[ 5] local 192.168.66.217 port 57070 connected to 192.168.66.101 port 5201[ ID] Interval Transfer Bitrate Retr Cwnd[ 5] 0.00-1.00 sec 282 MBytes 2.37 Gbits/sec 0 833 KBytes[ 5] 1.00-2.00 sec 280 MBytes 2.35 Gbits/sec 0 833 KBytes[ 5] 2.00-3.00 sec 280 MBytes 2.35 Gbits/sec 0 833 KBytes[ 5] 3.00-4.00 sec 280 MBytes 2.35 Gbits/sec 0 875 KBytes[ 5] 4.00-5.00 sec 280 MBytes 2.35 Gbits/sec 0 875 KBytes[ 5] 5.00-6.00 sec 281 MBytes 2.36 Gbits/sec 0 875 KBytes[ 5] 6.00-7.00 sec 280 MBytes 2.35 Gbits/sec 0 875 KBytes[ 5] 7.00-8.00 sec 278 MBytes 2.33 Gbits/sec 0 923 KBytes[ 5] 8.00-9.00 sec 280 MBytes 2.35 Gbits/sec 0 1000 KBytes[ 5] 9.00-10.00 sec 280 MBytes 2.35 Gbits/sec 0 1000 KBytes- - - - - - - - - - - - - - - - - - - - - - - - -[ ID] Interval Transfer Bitrate Retr[ 5] 0.00-10.00 sec 2.74 GBytes 2.35 Gbits/sec 0 sender[ 5] 0.00-10.00 sec 2.73 GBytes 2.35 Gbits/sec receiveriperf Done.root@CM3588:~# iperf3 -c 192.168.66.101 -R -Viperf 3.12Linux CM3588 6.1.25 #308 SMP Wed Jan 17 14:13:18 CST 2024 aarch64Control connection MSS 1448Time: Thu, 02 May 2024 12:22:16 GMTConnecting to host 192.168.66.101, port 5201Reverse mode, remote host 192.168.66.101 is sendingCookie: 2tfpsffinfmgqeehfteq73ekjmzeooli4f2gTCP MSS: 1448 (default)[ 5] local 192.168.66.217 port 35914 connected to 192.168.66.101 port 5201Starting Test: protocol: TCP, 1 streams, 131072 byte blocks, omitting 0 seconds, 10 second test, tos 0[ ID] Interval Transfer Bitrate[ 5] 0.00-1.00 sec 212 MBytes 1.78 Gbits/sec[ 5] 1.00-2.00 sec 216 MBytes 1.81 Gbits/sec[ 5] 2.00-3.00 sec 217 MBytes 1.82 Gbits/sec[ 5] 3.00-4.00 sec 216 MBytes 1.81 Gbits/sec[ 5] 4.00-5.00 sec 215 MBytes 1.80 Gbits/sec[ 5] 5.00-6.00 sec 216 MBytes 1.81 Gbits/sec[ 5] 6.00-7.00 sec 216 MBytes 1.81 Gbits/sec[ 5] 7.00-8.00 sec 216 MBytes 1.81 Gbits/sec[ 5] 8.00-9.00 sec 216 MBytes 1.82 Gbits/sec[ 5] 9.00-10.00 sec 215 MBytes 1.81 Gbits/sec- - - - - - - - - - - - - - - - - - - - - - - - -Test Complete. Summary Results:[ ID] Interval Transfer Bitrate Retr[ 5] 0.00-10.01 sec 2.11 GBytes 1.81 Gbits/sec 0 sender[ 5] 0.00-10.00 sec 2.10 GBytes 1.81 Gbits/sec receiversnd_tcp_congestion cubicrcv_tcp_congestion cubiciperf Done.root@CM3588:~# iperf3 -c 192.168.66.101 -bidir -Viperf 3.12Linux CM3588 6.1.25 #308 SMP Wed Jan 17 14:13:18 CST 2024 aarch64Control connection MSS 1448Time: Thu, 02 May 2024 12:22:28 GMTConnecting to host 192.168.66.101, port 5201Cookie: pknn6e2potjx47hr4wk2ewldyy4mj2nthnwoTCP MSS: 1448 (default)[ 5] local 192.168.66.217 port 54922 connected to 192.168.66.101 port 5201Starting Test: protocol: TCP, 1 streams, 131072 byte blocks, omitting 0 seconds, 10 second test, tos 0[ ID] Interval Transfer Bitrate Retr Cwnd[ 5] 0.00-1.00 sec 280 MBytes 2.35 Gbits/sec 0 737 KBytes[ 5] 1.00-2.00 sec 280 MBytes 2.35 Gbits/sec 0 737 KBytes[ 5] 2.00-3.00 sec 280 MBytes 2.35 Gbits/sec 0 776 KBytes[ 5] 3.00-4.00 sec 280 MBytes 2.35 Gbits/sec 0 776 KBytes[ 5] 4.00-5.00 sec 280 MBytes 2.35 Gbits/sec 0 776 KBytes[ 5] 5.00-6.00 sec 281 MBytes 2.36 Gbits/sec 0 776 KBytes[ 5] 6.00-7.00 sec 280 MBytes 2.35 Gbits/sec 0 776 KBytes[ 5] 7.00-8.00 sec 280 MBytes 2.35 Gbits/sec 0 776 KBytes[ 5] 8.00-9.00 sec 280 MBytes 2.35 Gbits/sec 0 814 KBytes[ 5] 9.00-10.00 sec 280 MBytes 2.35 Gbits/sec 0 814 KBytes- - - - - - - - - - - - - - - - - - - - - - - - -Test Complete. Summary Results:[ ID] Interval Transfer Bitrate Retr[ 5] 0.00-10.00 sec 2.74 GBytes 2.35 Gbits/sec 0 sender[ 5] 0.00-10.00 sec 2.73 GBytes 2.35 Gbits/sec receiverCPU Utilization: local/sender 18.0% (0.4%u/17.6%s), remote/receiver 36.2% (0.5%u/35.7%s)snd_tcp_congestion cubicrcv_tcp_congestion cubiciperf Done.root@CM3588:~# iperf3 -c 192.168.66.101 -u -Viperf 3.12Linux CM3588 6.1.25 #308 SMP Wed Jan 17 14:13:18 CST 2024 aarch64Control connection MSS 1448Setting UDP block size to 1448Time: Thu, 02 May 2024 12:22:41 GMTConnecting to host 192.168.66.101, port 5201Cookie: unifn3ud3pl2blzz2njjksyx7qerxhv3ploaTarget Bitrate: 1048576[ 5] local 192.168.66.217 port 48656 connected to 192.168.66.101 port 5201Starting Test: protocol: UDP, 1 streams, 1448 byte blocks, omitting 0 seconds, 10 second test, tos 0[ ID] Interval Transfer Bitrate Total Datagrams[ 5] 0.00-1.00 sec 129 KBytes 1.05 Mbits/sec 91[ 5] 1.00-2.00 sec 127 KBytes 1.04 Mbits/sec 90[ 5] 2.00-3.00 sec 129 KBytes 1.05 Mbits/sec 91[ 5] 3.00-4.00 sec 127 KBytes 1.04 Mbits/sec 90[ 5] 4.00-5.00 sec 129 KBytes 1.05 Mbits/sec 91[ 5] 5.00-6.00 sec 129 KBytes 1.05 Mbits/sec 91[ 5] 6.00-7.00 sec 127 KBytes 1.04 Mbits/sec 90[ 5] 7.00-8.00 sec 129 KBytes 1.05 Mbits/sec 91[ 5] 8.00-9.00 sec 127 KBytes 1.04 Mbits/sec 90[ 5] 9.00-10.00 sec 129 KBytes 1.05 Mbits/sec 91- - - - - - - - - - - - - - - - - - - - - - - - -Test Complete. Summary Results:[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams[ 5] 0.00-10.00 sec 1.25 MBytes 1.05 Mbits/sec 0.000 ms 0/906 (0%) sender[ 5] 0.00-10.00 sec 1.25 MBytes 1.05 Mbits/sec 0.004 ms 0/906 (0%) receiverCPU Utilization: local/sender 1.4% (0.5%u/1.0%s), remote/receiver 0.5% (0.2%u/0.3%s)iperf Done.root@CM3588:~# iperf3 -c 192.168.66.101 -u -R -Viperf 3.12Linux CM3588 6.1.25 #308 SMP Wed Jan 17 14:13:18 CST 2024 aarch64Control connection MSS 1448Setting UDP block size to 1448Time: Thu, 02 May 2024 12:22:52 GMTConnecting to host 192.168.66.101, port 5201Reverse mode, remote host 192.168.66.101 is sendingCookie: npoielffdauxuast53vo2be27jgga5wqiugcTarget Bitrate: 1048576[ 5] local 192.168.66.217 port 47791 connected to 192.168.66.101 port 5201Starting Test: protocol: UDP, 1 streams, 1448 byte blocks, omitting 0 seconds, 10 second test, tos 0[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams[ 5] 0.00-1.00 sec 129 KBytes 1.05 Mbits/sec 0.034 ms 0/91 (0%)[ 5] 1.00-2.00 sec 129 KBytes 1.05 Mbits/sec 0.051 ms 0/91 (0%)[ 5] 2.00-3.00 sec 127 KBytes 1.04 Mbits/sec 0.065 ms 0/90 (0%)[ 5] 3.00-4.00 sec 129 KBytes 1.05 Mbits/sec 0.049 ms 0/91 (0%)[ 5] 4.00-5.00 sec 127 KBytes 1.04 Mbits/sec 0.046 ms 0/90 (0%)[ 5] 5.00-6.00 sec 129 KBytes 1.05 Mbits/sec 0.029 ms 0/91 (0%)[ 5] 6.00-7.00 sec 127 KBytes 1.04 Mbits/sec 0.045 ms 0/90 (0%)[ 5] 7.00-8.00 sec 129 KBytes 1.05 Mbits/sec 0.128 ms 0/91 (0%)[ 5] 8.00-9.00 sec 127 KBytes 1.04 Mbits/sec 0.011 ms 0/90 (0%)[ 5] 9.00-10.00 sec 129 KBytes 1.05 Mbits/sec 0.080 ms 0/91 (0%)- - - - - - - - - - - - - - - - - - - - - - - - -Test Complete. Summary Results:[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams[ 5] 0.00-10.00 sec 1.25 MBytes 1.05 Mbits/sec 0.000 ms 0/906 (0%) sender[ 5] 0.00-10.00 sec 1.25 MBytes 1.05 Mbits/sec 0.080 ms 0/906 (0%) receiveriperf Done.root@CM3588:~# iperf3 -c 192.168.66.101 -u -bidir -Viperf 3.12Linux CM3588 6.1.25 #308 SMP Wed Jan 17 14:13:18 CST 2024 aarch64Control connection MSS 1448Setting UDP block size to 1448Time: Thu, 02 May 2024 12:23:04 GMTConnecting to host 192.168.66.101, port 5201Cookie: 3z4vporaqa3vcfswbp6ornqc6zfdb6fk6huc[ 5] local 192.168.66.217 port 49488 connected to 192.168.66.101 port 5201Starting Test: protocol: UDP, 1 streams, 1448 byte blocks, omitting 0 seconds, 10 second test, tos 0[ ID] Interval Transfer Bitrate Total Datagrams[ 5] 0.00-1.00 sec 248 MBytes 2.08 Gbits/sec 179770[ 5] 1.00-2.00 sec 267 MBytes 2.24 Gbits/sec 193040[ 5] 2.00-3.00 sec 280 MBytes 2.35 Gbits/sec 202660[ 5] 3.00-4.00 sec 252 MBytes 2.11 Gbits/sec 182210[ 5] 4.00-5.00 sec 273 MBytes 2.29 Gbits/sec 197830[ 5] 5.00-6.00 sec 269 MBytes 2.25 Gbits/sec 194540[ 5] 6.00-7.00 sec 276 MBytes 2.32 Gbits/sec 200030[ 5] 7.00-8.00 sec 279 MBytes 2.34 Gbits/sec 201960[ 5] 8.00-9.00 sec 271 MBytes 2.28 Gbits/sec 196550[ 5] 9.00-10.00 sec 266 MBytes 2.23 Gbits/sec 192860- - - - - - - - - - - - - - - - - - - - - - - - -Test Complete. Summary Results:[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams[ 5] 0.00-10.00 sec 2.62 GBytes 2.25 Gbits/sec 0.000 ms 0/1941450 (0%) sender[ 5] 0.00-10.00 sec 2.62 GBytes 2.25 Gbits/sec 0.005 ms 0/1941450 (0%) receiverCPU Utilization: local/sender 65.0% (5.0%u/60.0%s), remote/receiver 105.2% (43.7%u/61.6%s)iperf Done.

Easy to install, works really well and good value for money, what's not to like!Used in UnRaid server with 'RTL8125 Drivers' plugin and works flawlessly at 2.5gb/s

Works great plug and play.