Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

1.3 inch IPS HD TFT ST7789 Drive IC 240 * 240 Full Color LCD Display Module

3,99€ 9,33€
Gratis verzending bij bestellingen boven 25,99€
  • 【LCD Display】 1pc 1.3 inch IPS HD TFT ST7789 Drive IC 240*240 Full Color LCD Display Module.
  • 【Resolution】 240 * 240 (Display direction can be adjusted, horizontal screen and vertical screen are OK)
  • 【Design compact】 Interface: 4-Wire SPI Interface, PIN NO .: 12Pin
  • 【High performance】 Viewing Direction: Full viewing angle
  • 【Fast delivery】 Fast and high quality delivery of Spain buying in TECNOIOT


1pc 1.3 inch IPS HD TFT ST7789 Drive IC 240*240 Full Color LCD Display Module

Features:

Size: 1.3 inch
Active Area: 23.4*23.4 mm
Module Size: 26.16*29.22 mm
Resolution: 240*240 (Display direction can be adjusted, horizontal screen and vertical screen are OK)
Drive IC: ST7789
Color: Full Color
Viewing Direction: Full viewing angle
Interface: 4-Wire SPI Interface
PIN NO.: 12Pin
Voltage: 3.3V
Working Temp.: -20 ~ 70 degree

Pin Descriptions:
PIN No Symbol Description
1 GND Soil
2 VDC Power 3.3 V
3 SCL Series watch pin
4 SDA Data Entry Series
5 RES LCM Reset pin
This pin is resetting the signal input. When the pin is low, the initialization of the chip is
Executed! Keep this plug high during normal operation.
6 DC Data / Control
7 BLK Control pin background

Packet Contains:

1pc x 1.3 inch IPS HD TFT ST7789 Drive Display Module


Thiago
8 juli 2025
De media kon niet worden geladen.
Andreas Kingbäck
4 juni 2025
My fault but without CS my ESP32 could not use SPI mode 3.
James
25 mei 2025
The description says it's an OLED display however there is a clearly a white blacklight during use, making it an LCD display not an OLED display. The header also comes detached unlike the images requiring soldering to make the display useful.
Vicente Garcerán
22 januari 2025
El display se recibió en el plazo indicado. Lo puse a funcionar sin problemas, pero a la tercera vez que lo conecté, empezó a verse cada vez más tenue hasta que ya no volvió a funcionar.Solo ha estado en funcionamiento total una hora o dos.
Carlos
12 november 2024
Pues la verdad es que mal. Lo que peor sabe es sacarla del paquete para ir a pincharla en la protoboard con todo el tinglao preparado y ver que los pines no vienen soldados y en la parte trasera, encima, presenta un aspecto nada prometedor, como si estuviera "quemada" o dañada. Un chasco.