18 Delig Kentekenplaat Schroeven Set, Roestvrij Staal Kentekenplaatschroeven en -doppen Schroefpakkingen Kentekenplaatbevestigingsset Antidiefstal voor Auto's Motorfietsen Vrachtwagens (Zwart)

Gold product solid

This product is super solid and is a simple and effective solution to the problem. Screws are typical #12 with a flanged hex nut. Easy to drive with a 10 mm nut driver. Nice finish on all parts. You will probably need a large flat head screwdriver to finish tightening because the nut fits closely inside the retainer washer. Caps snapped into place very firmly so they are going to stay put for sure. In fact should you need to remove these to replace your plate most likely you will have to carefully remove the caps with a pliers. So keep the spares for later. Excellent product.

Good steel screws, although the slot head is shallow and with the amount of torque I needed to get these in, (as they are slightly oversized for a self tapping bite) a nice big torx head would have been better. They are 10mm hex heads, so if you have a socket to hand I would go for that everytime. Though again, the heads are a bit shallow.I mildly damaged the heads on mine by using the slot head and not being patient enough to go and get a 10mm socket. Though a black paint marker will sort the marks.These came in a pack of six. Overall good.

RAS

ok