Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

2pcs OLED 128X64 Display OLED LCD LED Display Module I2C IIC SPI Serial COLOR BLUE

6,99€ 12,64€
Gratis verzending bij bestellingen boven 25,99€

Over dit item

  • 【Driver IC】 SSD1309, Color - blue
  • 【Resolutions】 0.96 inches OLED; High resolution - 128 x 64; Drive speed - 1/64.
  • 【Fast delivery】 Fast and high quality delivery of Spain buying in TECNOIOT
  • 【High performance】 2.4 cm (0.96 ") OLED LCD screen SSD1306 128X64 with SPI series.
  • 【Panel size】 26.70 mm x 19.26 mm x 1.85 mm.


x2pcs OLED Display 128X64 OLED LCD LED Display Module For I2C IIC SPI Serial

Descriptions:

What is OLED?OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.

Features:

Size: 0.96
Resolution: 128X64
Color: Blue
Viewing angle: greater than 160 degrees
Supported platforms: for , 51 series, MSP430 series, STIM32 / 2, SCR chips
Low power consumption: 0.04W during normal operation
Support wide voltage: 3.3V-5V DC
Working temperature: -30-80 degrees
Volume: 27MM * 27MM * 4.1MM
Driver IC: SSD1306
Communication: IIC, only two I / O ports
No font: The software takes word modulo
Backlight: OLED self light, no backlight

Package Contains:
2pcs x OLED Display 128X64 OLED LCD LED Display Module (With 4pins not soldered)


xelander
10 augustus 2025
Differentemente da quanto scritto non e'compatibile con drive 1306
Ivans
6 augustus 2025
Good priče.
Gerthoffert Damien
9 mei 2025
Le produit correspond à la description, hormis le fait que je n ai pas pu le faire fonctionner en SPI (i2c seulement). Il aurait fallu des instructions. Si je ne retourne pas le produit c est uniquement parce que je peux faire des modifications pour communiquer en i2c.OK techniquement parlant
Jose L
14 maart 2025
Envío rápido
Bernardo Gomez
1 december 2024
No he conseguido que funcionen, ninguna de las dos pantallas, lo he probado en Arduino y tambien con la controladora ESP32 y aunque he validado que se comunicaba con ella, la pantalla no se encendia de ninguna manera, muy mal producto.