Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

3 Stuks 10W Sensor Van Het Waterniveau, pp Zij-Opgezette Horizontale Vloeibare Vlotterschakelaar, Water Vloeibare Niveausensoren voor Tankpool, Aquarium

6,99€ 11,99€
Gratis verzending bij bestellingen boven 25,99€

1.Maat:M12 - Zwart - 2 Stuks


Productdetails

  • Praktische prestaties: de voorste zwevende kop van de vloeistofniveausensor zal onder verschillende hoeken drijven volgens het vloeistofniveau om het vloeistofniveau in een tank te detecteren en een pomp, een indicator, een alarm of andere apparaten aan te sturen.
  • Instelbare werking: de sensor kan naar behoefte worden geïnstalleerd als een normaal gesloten/normaal open schakelaar met schakelaars, indicatoren en andere apparatuur.
  • Hoogwaardig materiaal: onze waterniveausensor is gemaakt van PP-plastic zonder kwik, met uitstekende zuur- en alkalibestendigheid.
  • Brede toepassing: het is een uitstekend hulpmiddel voor het bewaken van het waterniveau van hydrocultuur, zoutwatertanks, zoetwatertanks, tuinieren, aquaria, voerbakken voor huisdieren, aquariums, ook voor besturing van de stroomkop, filtratie, verwarming enz.
  • Pakket bestaat uit: 3 stuks kunststof vlotterschakelaars.


Productbeschrijving

Opmerking:Vlotter gebruikt in combinatie met het relais kan niet rechtstreeks worden gebruikt met de voeding.
Specificatie:
Materiaal: PP
Contractwaarde (max.): 10W
Schakelspanning (Max): 110V DC
Schakelstroom (Max): 0.5A
Draagstroom (max.): 1.0A
Contractweerstand (max.): 100ohm
Temperatuurwaarde: -20 - +80 °C
Pakketinhoud:
3 x vloeistofniveausensor


Kunde
29 juli 2025
Amazon’s keuze, en dat klopt ook.
Cliente
5 juli 2025
Robusto e facile da montare
Joaquín B.
30 juni 2025
Lo he comprado por segunda vez para mis depósitos de agua del campo. Los anteriores que compré hace más de dos años funcionan perfectamente. Son muy resistentesEs buen producto 👌
M. sylvain
2 juni 2025
J'étais à la recherche de petit interrupteur à flotteurs.Cette petite chose est parfaite. Fonctionne super bien
John
29 mei 2025
In the picture it is the switch at the back, it was easier to fit another switch instead of trying to source the original what has been stuck in with sikaflex.A robust switch that is value for money, very easy to install, comes with a rubber seal that can be cut down to thickness of the tank.Drill the whole so the rubber seal is a slight squeeze to get insertClean off any rough edgesInsert the rubber seal then pull the switch through, while the switch is in cut round it with a Stanley knife to cut the seal flat to the tankTighten till the switch can’t really move on its own without force and you’re doneDo not over tighten as it won’t seal properly
Bokowy
5 november 2024
alles passt..!!!