4 STKS Compatibel met Land Rover Freelander 2 LR2 2006-2016 Dakrail Rack Cross Bar Crossbar

I bought this after discovering that the OEM-equivalent part seemed to be discontinued and impossible to find. It fit just fine on my LR2 with the following problems:1. One of the holes in the middle mounting point on each rail (the one with the separately attached rail component) didn't line up with the hole in the vehicle roof by almost half and inch. I think the part was slightly miscast and also the hole on the part was slightly misaligned. I was able to drill out a new hole just enough to provide clearance to line up with the hole in the vehicle body.2. The hardware that comes with this kit is supposed to thread into existing hole threads in the vehicle body for the rear two mounts on each side. I found that the hardware was not capable of cutting threads in the existing body hole (though my existing threads were kind of gunky), so I had to get an M6x1.0 tap to cut new threads for the hardware to work.Otherwise, I'm happy with the item.