Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

5pcs AD9833 Programmable Microprocessors Serial Interface Sine Square Wave DDS

8,99€ 20,15€
Gratis verzending bij bestellingen boven 25,99€
  • 【AD9833】The AD9833 is a low power, programmable waveform generator capable of producing sine, triangular, and square wave outputs. Waveform generation is required in various types of sensing, actuation, and time domain reflectometry (TDR) applications.
  • 【Design compact】 The output frequency and phase are software programmable, allowing easy tuning. No external components are needed. The frequency registers are 28 bits wide: with a 25 MHz clock rate, resolution of 0.1 Hz can be achieved; with a 1 MHz clock rate, the AD9833 can be tuned to 0.004 Hz resolution.
  • 【High performance】 The AD9833 has a standard serial interface that allows the part to interface directly with several microprocessors. The device uses an external serial clock to write the data or control information into the device.
  • 【Applications】 The AD9833WBRMZ-REEL model is available with controlled manufacturing to support the quality and reliability requirements of automotive applications. Note that this automotive model may have specifications that differ from the commercial models; therefore, designers should review the Specifications section of this data sheet carefully.
  • 【Fast delivery】 Fast and high quality delivery of Spain buying in TECNOIOT


X5pcs AD9833 Programmeerbare Microprocessors Serial Interface Sine Square Wave DDS Signaalgenerator

De AD9833 is een laag vermogen, programmeerbare golfvormgenerator die sine, driehoekig en vierkante golfuitgangen kan produceren. Waveform generatie is vereist in verschillende soorten sensatie, actuatie, en tijddomein reflectometrische (TDR) toepassingen. De outputfrequentie en fase zijn programmeerbaar voor eenvoudige afstemming. Er zijn geen externe componenten nodig. De frequentieregisters zijn 28 bits breed: met een 25 MHz kloksnelheid, resolutie van 0,1 Hz kan worden bereikt; met een 1 MHz kloksnelheid kan de AD9833 worden afgestemd op een resolutie van 0,004 Hz.
De AD9833 heeft een standaard seriële interface waarmee het onderdeel direct kan worden aangesloten op verschillende microprocessors. Het apparaat maakt gebruik van een externe seriële klok om de gegevens of besturingsinformatie in het apparaat te schrijven.
Kenmerken:

Digitaal programmeerbare frequentie en fase.
12,65 mW stroomverbruik bij 3 V.
0 MHz tot 12,5 MHz uitgangsfrequentiebereik.
28-bit resolutie: 0,1 Hz bij 25 MHz referentieklok
Sinusoïdaal, driehoekig en vierkante golfuitgangen.
2,3 V tot 5,5 V voeding
Geen externe componenten nodig.
3-draads SPI-interface.
Uitgebreid temperatuurbereik: -40 tot +105 graden.
Power-down optie.
Updatesnelheid: 25 (max).
VOUT maximaal: 0,65 V
VOUT Minimum: 38mV
VOUT Temperatuurcoëfficiënt: 200 graden.
Input High Voltage: 1,7-2,8 V
Input Low Voltage: 0,5-0,7 V
Inputstroom: 10µA
Inputcapaciteit: 3pF
Bedrijfstemperatuurbereik is -40 tot +105 graden; typische specificaties zijn bij 25 graden.
Afmetingen: 17 x 12 mm.
Inhoud levering:

5 stuks x AD9833 Sine Square Wave DDS Signaalgenerator


Cliente
28 juni 2025
Funzionano bene
Dorian C.
13 mei 2025
Quand c'est vendu sur un site chinois, c'est normal mais sur Amazon, on s'attend à un peu plus d'instructions avec les produits.Aucun manuel d'utilisation, on doit se débrouiller seul avec les tutoriaux en ligne.Sinon fonctionne bien une fois après.
Francesco T.
14 januari 2025
Questo prodotto come tanti altri della stessa categoria sono mancanti di documentazione

Misschien vind je dit ook leuk