Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

6 Stuks Spindelschuurmoffen, 120 Grit Schuurmoffen voor Oscillerende Schuurmachine Metaal Roest Verwijderen

6,99€ 15,28€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Houtschuren -- Gebruik voor het zachter maken van hout, randbehandeling, oppervlaktebehandeling, om houten handwerkontwerpen te vormen.
  • 120 Grit -- 120 mesh schuurpapier, geschikt voor het schuren en polijsten van hout en glasvezel. Het is een ideaal schuuraccessoire voor thuis houtwerk, kunstverwerking en handwerk.
  • 6 STUKS Schuurpapier Ring – Wanneer u deze set schuurmoffen bestelt, ontvangt u 6 hoogwaardige spindelschuurmoffen voor verschillende toepassingen.
  • Binnendiameter van lange schuurpapierring -- 80 mm / 3,14 inch, 55 mm / 2,16 inch, 38 mm / 1,5 inch, 25 mm / 0,98 inch, 20 mm / 0,78 inch, 12 mm / 0,47 inch.
  • Toepassing -- Zeer geschikt voor handschuren in een smalle ruimte of verschillende kleine metaal- en houtambachten.


Productbeschrijving

Specificatie:
Type voorwerp: Schuurpapier Ring Set
Materiaal: schuurpapier
Binnendiameter: 80 mm / 3,14 inch, 55 mm / 2,16 inch, 38 mm / 1,5 inch, 25 mm / 0,98 inch, 20 mm / 0,78 inch, 12 mm / 0,47 inch
Productlengte: Ca. 11,5 cm / 4,5 inch
Productspecificaties: 120 mesh
Bruto gewicht: Ca. 142g/5oz
Toepassingsgebied: slijpen, polijsten, enz.

Pakketlijst:
6 x Schuurpapier Ring


M. A. Nuttall
20 april 2025
I have the triton oscillating sander, these sleeves fit the rubber inserts on that perfectly. They tighten up and work well... good material removal, they will block up depending on the softness of the material but a sanding rubber soon pulls that off and you are away again... they are lasting well. They do get hot in use so be careful not to apply too much pressure and burn the word. But they are a great replacement set. Very affordable, very useful.
Zippy
25 december 2024
I got these for my Triton bobbin sanders, and they are a perfect fit. I have two sanders, one dedicated bobbin sander and one which converts to a vertical belt sander. These bobbins fit both.The quality of the abrasive on the bobbins is on a par with the originals that came with the sanders, so I'm very happy with them.