6202-2RS Diepe Groove kogellagers, enkelvoudig rubberen verzegelde kogellagers, geschikt voor scooterskates, thuisapparaten, machinery, industrieel (15 x 35 x 11 mm)

Actual bearing size:

Inner diameter 15mm，outer diameter 35mm, width 11mm.

Strong and sturdy:

The bearing is made of bearing steel, anti-rust, it’s not easy to be affected by air moisture and contamination even if long-term exposure to the air,

Polishing process:

The surface of deep groove ball bearing is smooth, with uniform force and strong load resistance and heat resistance.

Not easily deformed:

The built-in steel ball is not deformed and has good load carrying capacity. The steel ball has low wear and can be used for a long time.

Low noise & high speed:

Low noise, the friction coefficient of deep groove ball bearings is very small, and the limit speed is also very high.

Rubber sealed bearings:

Effectively prevent the intrusion of sand, dust, water and other foreign objects, and increase the service life of the bearing

Widely applicable:

It can be used on parts that bear axial load, such as low-power motors, automobile and tractor gearboxes, machine tool gearboxes, general machines, etc.

Various specifications：

Our products include deep groove ball bearing, angular contact ball bearing, taper roller bearing, and needle bearing.

Installation 1:Press-fitting: The bearing can be press-fitted on the shaft with a press, and then the shaft and the bearing are loaded into the bearing seat hole. During press-fitting, an assembly sleeve made of a soft metal material is padded on the end of the bearing inner ring and the outer ring of the bearing is tightly matched with the bearing seat hole.

Installation 2:Heating fit: using thermal expansion to change the tight fit in to loose fit by heating the bearing or bearing seat.