Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
Beschrijving van het product:
Micro-poreuze waterdichte coatingtechnologie
- Dimensionaal stabiele film betekent geweldige registratie en geen curling
- Snelle droge tijd is gelijk aan snellere procestijden en minder inktgebruik
- Nauwkeurige puntplaatsing resulteert in uitstekende lijndefinitie en scherpte
- Hoge inktbelastbaarheid
- Minimale "vergeling" zorgt ervoor dat de verwerkte film het beeld na verloop van tijd behouden en herhaaldelijk gebruikt kan worden
- Dikte: 4 Mil
Opmerking:
De kant van de film om op te drukken: waterdichte film heeft twee kanten, de dragerbladzijde en de ontvankelijke kant van inkjet. Om te bepalen welke kant de ontvankelijke kant van de inkjet is, bevochtigt u uw vinger en raakt u een hoek van de film aan, de zijde die kleverig is, is de kant die inkt zal nemen.
Brian and Amber
2 juli 2025
I use these for making a screen for screen printing. The print came out very well. I use the matte photo setting. When I got it wet it had a hazy spot after just wiping it off, I lightly used a blow dryer on low heat to dry it and the hazy spot went away.
Danae Lintz
14 juni 2025
I tried printing black ink on this paper using my Epson WF 7710. The first attempt I put one sheet on top of my regular paper in the tray and pressed print. The transparency stuck to the plain white paper and the image printed on the white paper. Second attempt I put a stack of transparencies in my tray and this time they all came through the printer together. Third attempt, I put one transparency in the tray, this time only one came through but was apparently on the incorrect side of the paper. Fourth attempt, one sheet in the tray, correct side inserted, finally success! The correct side of the paper is the rougher side not the glossy. The glossy side just smears ink everywhere. Hope this helps!
MRB
20 mei 2025
The sheets are veeeeerry slightly opaque but it doesn’t affect what I needed it for. Make sure you print on the side that is more textured or else they won’t work and also to set your printer to photo paper or glossy paper, that way the printer will adjust to reduce any chance of smearing. The ink dried quickly, no smearing whatsoever. The sheet has a nice weight so it’s not super flimsy. I taped the printed image on top of something and the tape gum stuck to the edges and didn’t come off because of whatever finish is on the film to keep the ink from smearing. I might print a reversed image next time so I can tape on the non-printable side and not have that issue.
Francisco T.
15 april 2025
i try 3 different brands with this one being the one on the right (in both pictures)and honestly the only problem that stands out is the fact that the paper is kind of foggy but the printing quality is good,the octagon brand is more clear with the same kind of quality on the print but you only get 30 sheets for the same price instead of 50 so up to you to pick
Traci
12 januari 2025
They are really good value for money, but there is a printing side and a none printing side and if you print on the none printing side the ink will never dry and it gets everywhere. But once you figure out how to put it in the printer to get it printed on the right side it's good. Package did not have any instructions. I wasted 5 to 6 film before I figured out the problem.
Aanbevolen producten
Misschien vind je dit ook leuk