Aidelife Afzuigkap voor Doorslijpen 115/125mm Afzuigkap voor haakse slijper+ diamantdoorslijpschijf 125 x 22,23 mm

Aangenaam verrast over hoe effectief bijna al het stof werd opgezogen.Ik merkte wel eens, na enkele sneden, dat de schijf bijna was losgekomen; misschien lag het wel aan mij, maar is me zonder nog nooit gebeurd. Voor de zekerheid, goed opletten dus, en af en toe opnieuw aanspannen.

Zero dust extraction, disc ends up cutting into the housing plastic no matter how you space it when opening / closing the housing. Don't waste your money on this. Look for another alternative

Super

Hay que colocarlo de manera que el disco corta a favor (lo cual es mas peligroso) pero funciona perfectamente y con una aspiradora no deja nada de polvo excepto el nomento en el que cortas hasta embutir el disco a la altura que ajustes. Maravilla!!!!!

I was sceptical that this would work well....but it does. There is a tiny bit of dust (and I mean tiny) when you first plunge the blade in before the cowl can seal but once started there is no dust at all. I put a brand new vacuum bag in before I started to maximise the suction and it worked brilliantly. You can set the sight to aim the blade and its very easy to operate after a practice run. This is a game changer for me after creating clouds of impossible dust for decades when using a grinder in brick and stone.If I had to say anything else it would be that it takes a while to set up. (5 mins) You have to remove the blade, bezel and guard from the grinder, select a sealing ring which was straight forward, then remove all 6 screws in the body of the cowl to split it apart. Then you fit one side of the cowl, the bezel plus the additional bezel and the cutting disc and then the locking nut. Then you fit the other side of the bezel with the 6 screws and you are good to go.If you wanted to make a shallower cut, there is an adjustment but you partly lose the seal of the cowl. I counteracted this with some tape but it best to just cut on full depth if you can. My grinder is a Bosch GWS 880 and there were no problems on fitting.This cowl is very good, great value for money and I would recommend it for both DIY and professional use.

Recoge el polvo pero al terminar de cortar una recta no coge todoLos adaptadores son un poco de baja calidadPero funciona bastante bien , no es perfecto

Impressed! Very good dust collection - just done a couple of metres of cuts for hiding a pipe in solid concrete floor and the only time any dust came out was when doing multiple shallow cuts, which resulted is tiny amount coming out of the front end.Used it with my George vac and a new Hepaflow bag, adapter included went straight on the hose.Only lost 1 star because it is far too wide to get a cut close to a wall - the plastic wing nut adding considerable depth and even with the spacer, my cutting blade was right at the limit of the opposite side