Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Airgoo Luxe Aibrush AG-326 Compressor met twee koelventilatoren en 3 liter luchttank, regelaar, vochtval voor hobby, levensmiddeldecoratie, tattoo, afbeelding enz

41,99€ 88,99€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Dubbele koelventilatoren om langdurig continu te kunnen werken
  • Hogere druk (3,5 bar aan / 4,5 bar uit) -0,50 bar hoger / Hogere precisie Meter: ± 0,2Bar-0,10Bar precisie hoger
  • Krachtige, energiezuinige eencilinder zuigercompressor, fluisterstille werking ca. 47 dB, 20-23L/min luchtopbrengst
  • 3.0L luchttank - meer constante luchtstroom, geïntegreerde stroom- en drukregelaar, manometer, waterafscheider
  • Ideaal voor airbrush-ontwerpers, modelbouwers, artiesten, taartdecorateurs, nail art en spraytanning


Productbeschrijving

Airgoo premium Aibrush-compressor AG-326 met twee ventilatoren en luchttank

streepjes:
Dubbele koelventilatoren om langdurig continu te kunnen werken.
Hogere druk (3,5 bar aan / 4,5 bar uit) - 0,50 bar hoger dan de conventionele compressor
zeer nauwkeurig meetinstrument: ± 0,2 bar-0,10 bar nauwkeurigheid hoger dan de traditionele meetindex.

Eenzuiger, olievrije minicompressor met een luchtreservoir (drukvat) en een uitlaatdrukregelaar voorzien van een filter en een manometer (manometer).
Het grote voordeel van deze compressor is dat deze een drukvat heeft. Nadat hij de vereiste druk heeft bereikt, schakelt hij zichzelf uit. Gaat weer aan wanneer het drukvat wordt uitgeschakeld. Laag volume tijdens bedrijf, ook 's avonds thuis te gebruiken.
Dankzij het lage gewicht is hij draagbaar en geschikt voor thuis- en hobbygebruik.
Deze compressor wordt veel gebruikt in gespecialiseerde nagelstudio's, hobby en voor thuisgebruik.Ook geschikt voor modelmakers
Deze compressor kan gebruikt worden voor airbrushpistolen met nozzles van 0,2 - 1 mm.

Het pakket bevat:
1x compressor met drukvat / 1x uitlaatdrukregelaar, met filter en manometer (manometer)
1x voedingskabel / 1x handleiding

Technische gegevens:
Informatie over de drukregelaar: 0-7 kgf / cm2 (0-100 PSI) / afdruk: 20-23 L / min zonder belasting
3L drukvat, zorgt voor de luchtbalans
Veiligheids- / aftapkraan, thermische beveiliging
Spanning: 220-240 V / 50 Hz / Vermogen: 0,123 kW (1 / 6HP)
Luchtaansluiting: schroef G 1/8 / snelheid: 1450/1700 tpm / volume: 60 dB / 1m
Gewicht: 6,00 kg Kabellengte: 1,9 m
Instelbare druk: van 0 bar tot 4,50 bar: automatische werking vanaf 3,50 BAR (42,50 PSI); automatische uitschakeling vanaf 4,50 BAR (67,50PSI)
Certificaten: CE, GS, ETL, CETL, ROHS


M Drost
28 juni 2025
De media kon niet worden geladen.
Stephen G
8 juni 2025
I've been using this compressor for a while now and painted 4-5 models with a couple of different airbrushes using it so I think I have enough working time to leave a review.First off it was a huge improvement over the travel compressor I had been using. This compressor has much more consistent pressure and doesn't fluctuate as you are using it, the travel compressor had no tank and would start running every time it was used so it was nice to get away from that.The compressor is surprisingly quiet as well, I was expecting it to be louder but pretty much all I hear is the faint thud of the pistons moving and a bit of a hum from the motor but that's pretty much it, the vibration isn't bad at all and I can keep this on the workbench where I paint and it doesn't cause any problems for me at all.As others have mentioned it can get quite warm when it's being used for longer periods but this is to be expected with most compressors. I have seen some people mention it gets too hot and it can't be touched but I haven't had this happen so far in longer sessions. It's great having the pressure adjustment so I can change this depending on the paints/primers/varnishes which has made life a lot easier.This does have the moisture trap included as well, that hasn't really ever been an issue for me but it's good to have there just in case when there's changes of weather/temperature etc. but so far I haven't had to be concerned.The build quality seems very good as well, everything is properly fitted and everything is tightened down properly so I have no issues with the compressor constantly switching on, drops in pressure or leaks in the connections or hose. Again I have seen some reviews mention issues with this and I'm sure things can leave the production line in a less than ideal state but I have no complaints for my compressor at all.Overall I would recommend this for beginners/intermediate users, it's a relatively inexpensive compressor and will do everything you need to get started and keep you going until you are more experienced, I think I will keep using this compressor for quite a long time before I look to change to another one.
Lotstrand
3 mei 2025
Väldigt tyst och håller trycket. Om det skulle vara något att anmärka på så är det kanske manualen. Hittade inte hur man skulle justera trycket, men testade att dra upp vredet efter ett tag innan jag skruvade på det.Använt till airbrush.
ClockDva
13 april 2025
Anche se acquistato come "usato" in pratica è nuovo.Forse c'è qualche vibrazione di troppo quando arriva a fine carica, ma sopportabile.Il flusso d'aria è costante e non scalda troppo anche se utilizzato in modo continuativo.
seereq
8 januari 2025
Dobry, w dobrej cenie kompresor. Wiadomo czego się po nim spodziewać. Jest tak samo głośny jak inne kompresory.Pracuje raczej bezproblemowo, utrzymuje stałe ciśnienie.przy około godzinie pracy nie przegrzewa się zbytnio.
Manu
24 oktober 2024
Super compresseur,Pas très bruyant fonctionne parfaitement bien.J'ai pris celui si car mon ancien compresseur se m'étais toujours en marche des que j'utilisais mon aérographe.Celui si dispose d'une petite réserve avant de redémarrer le moteur pour remplir la cuve et possède un système de ventilation en cas de surchauffe du a une longues utilisation.

Misschien vind je dit ook leuk