Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

ANNIMOS 25kg RC Digitale Standaard Servo 1/8 1/10 1/12 Schalen Grote Koppel Hoge Snelheid Volledige Metalen Gear Waterdicht 180 Graden Controle Hoek

10,99€ 21,99€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Nieuw Model: 25kg Servos.More koppel, hogere snelheid
  • Het netsnoer is langer tot 17,7 inch (45 cm), en ook verzonden met een 25T verstelbare metalen servoarm
  • Uitgerust met hoge precisie potentiometers en hoge resolutie digitale chip, zorgen voor stabiele prestaties, snelle reactie, sterke anti-interferentie vermogen, laag geluidsniveau, snelle warmteafvoer
  • Beste voor uw DIY-project: compatibel met 1/8 en 1/10 schaal crawler, vrachtwagen, buggy, robotarm en elke toepassing waar standaard servo's worden gebruikt
  • Afmetingen:1,57 x 0,78 x 1,59 inch (40 x 20 x 40,5 mm); Gewicht: 2,64 oz (75 g)


Productbeschrijving

Specificatie:
DS3225MG RC hobby servo's worden ontworpen voor op afstand werkende modelvoertuigen, zoals auto's, vliegtuigen, en robots.It verstrekt de functionaliteit van een lichtgewicht standaard servo, hoge snelheid groot koppel, waterbestendig, gevoelig, responsief;
Het beschikt over een volledig metalen tandwieltrein, digitale besturingselektronica en twee kogellagers op de uitgaande as voor verminderde wrijving, en het biedt gemakkelijke toegang tot de rustpuntaanpassingspotentiometer, waardoor ze geweldige actuatoren zijn voor robotprojecten. Dit nieuwe item is een zeer goede keuze voor studenten en hobbyisten. Het zal je niet teleurstellen!
Elektrische specificatie:
Bedrijfsspanningsbereik: 4,8 - 6,8 V
Bedrijfssnelheid (5,0 V): 0,15 sec/60 graden
Bedrijfssnelheid (6,8 V): 0,13 sec/60 graden
Stall koppel (5.0V): 21kg/cm
Stall koppel (6.8V): 25kg/cm
Controle Specificatie:
Controlesysteem: PWM (Pulse breedte modificatie)
Pulsbreedte bereik: 500 ~ 2500 μsec
Neutrale positie: 1500μsec
Lopende graad: 180° (wanneer 500~2500 μsec)
Dode bandbreedte: 3 μsec
Frequentie: 50-330Hz
Roterende richting: Tegen de klok in (wanneer 500~2500 μsec)
Mechanische specificatie:
Overbrengingsverhouding: 275
Lager: Dubbel lager
Connector draad: 17,7 inch (450 mm)
Motor: 3-polig(en)
Waterdichte prestaties: IP66
Pakket:
1 x DS3225MG Digitale Servo
1 x 25T Verstelbare metalen servoarm
We hebben meer servo's voor uw keuze:
▶35KG Coreless servo 270°, zoek ASIN: B07SWST8D6
▶ 20 KG controlehoek 180 °, zoek ASIN: B0769DFJVK
▶ 20 KG Controlehoek 270°, zoek ASIN: B076CNKQX4
▶ 25 kg controlehoek 270 °, zoek ASIN: B07GK1G5FV
▶ 60 kg controlehoek 180 °, zoek ASIN: B07KTS4L94
▶ 60 kg controlehoek 180 °, zoek ASIN: B07KTSCN4J


Dex
22 juli 2025
For the price..very good strong servo with metal gears and metal servo horn that is screwed in in 3 places. Much better then stock servos.
Swerve
19 juni 2025
Direct fit for my arrma notorious. Sturdy gears. It comes with a 25t aluminum servo arm which is like a $9 accessory by itself. So that's a big plus
NOTORIOUS J_Rc
17 februari 2025
I bought one of these for a Notorious 6s, earlier in 2019. It didn't hold up very well to the winter elements, but Amazon was quick to send a replacement. The second one lasted about 4 months of pretty heavy bashing, so I also bought one for my Typhon 6s. Pretty strong and quick considering the price, but don't expect them to last like a Savox.
SuperE
27 december 2024
I picked up this 25kg servo to replace the 20kg version I was using in my TRX-4. The value of this servo is phenomenal and you get a strong servo that has metal gears and includes a metal servo horn (which isn't a perfect fit on the TRX-4, but close enough for most after adjusting the endpoints).My biggest concern is that the "waterproof" claim isn't exactly true. One of my 20kg servos of the same brand seemingly died one day and when I took it apart I discovered it had water in it. Upon inspection of this 25kg servo, I can see that the seals are not watertight (poor QC) and the opening where the wire goes into the servo is pretty much open, despite having a rubber seal.My suggestion is to manually waterproof these servos with a combination of marine grease (on all o-rings and on the opening where the shaft is, then apply shoe goo or something similar along the wire opening so that's sealed up.Overall, these are still the best bang for your buck, and I will continue to buy them.
Gino
14 december 2024
Bought this to replace a stock servo that died way too soon from a major brand. This is by far leaps and bounds ahead of the factory servo that came with my vehicle. If you are thinking of replacing your servo or upgrading for better response and durability, I Wholeheartedly recommend this servo!