Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
Jannik Vitztum
7 juli 2025
Das Ding ist Spitze, kühlt genauso gut wie meine alter Heatkiller Kupferblock mit WaKü!
Alan
19 juni 2025
At max RPM it’s managed to keep the Epyc 7532 at a max of 43c in a 22c ambient room with poor airflow. At about 1000 RPM it maxes at 55c this test was done under full load. Attaching the cooler to the brackets isn’t like the usual consumer grade coolers, make sure you attach the brackets to the cooler first and the screws get screwed in from underneath to keep the bracket in place or at least for the AMD side of things. I tried attaching the brackets to the board and cooler after the fact and well, it was a lesson learned. Impressive cooler for impressive value. I was going to add my P12 Max fans to this but the fans that come with the cooler are more than adequate.
Customer
27 mei 2025
Usually go with Noctua for my server builds but those SP3 coolers would blow air up into the top of the case on my new ASRock ROMED8-2T motherboard. This is the ONLY SP3 cooler that blows air horizontally that does not sound like a jet taking off. I was going to 3D Print the 120mm fan adapters for this and put Noctua fans on it but the fans that come with it are more than adequate. Keeps my AMD EPYC 7402P cool and quiet while providing the proper air flow.
Customer
13 mei 2025
Using it to cool a 64 core Epyc socket SP3. The cooler is quiet and keeps the temperature of the CPU to a reasonable level. Fitting is releatively easy but you have to follow the instructions as everything needs to be positioned correctly depending on the exact setup you have. There is also an order required to tighten everything down to make sure that you get good, strong contact with the CPU, but everything is well shown in the instructions.
K.
4 december 2024
I have it on an Epyc 7532 and it keeps it well under 70c even under heavy load. The included fans are quiet even at high speeds. Super easy to install too which is nice.
Aanbevolen producten