Arctic Silver AS5, 3.5g heat sink compound 9 W/m·K 3,5 g

Doet wat het moet doen.

Gebruikt om de CPU van de Playstation 4 opnieuw mee te monteren. Bekend probleem dat die nog wel eens te warm wil worden door gebruik van mindere kwaliteit koelpasta door Sony. Blijft nu op mooie tenperatuur.

100 % goed

coloquei no meu water, muito bom este produto.

Arctic Silver- Age old name & professionals choice for any high end machine. Had its name in mind since years. So when the need came ordered one.Product comes in open poly packaging. There is neither any blister pack nor any seal. Appears like product is imported in bulk & then sold in loose packaging. Only a Zip lock poly bag with a syringe containing 3.5 AS5 compund.But it appears genuine & performs well.*******PROS*******1. Its old & trusted name in thermal paste world2. Will bring down temperatures by 10-20 degrees. More important is system will be stable under load & run for longer durations at higher frequencies.3. Qty is also good. If applied in right qty without wastage, it may last for approx 4-5 repaste jobs, on cpu & gpu.*******CONS*******Only con being, though not electrically conductive its slightly capacitive, and if not applied carefully, will spread outside to small components on die & create trouble.**********************USAGE SCENARIO**********************I used it in my old Dell XPS L502x & Inspiron 15R (all stats are wrt xps one), to replace stock thermal paste on CPU & GPU.CPU throttling due to excess core temperatures 95 Deg + on load. On even small load, it shooted up to 100 & then throttling will occur.High temp were due to dust accumulation on vents, fin & old expired thermal paste.***********HOW TO***********1. Using cleaning solution (eg isopropyl alcohol available at chemist shop) & swab, clean out old paste. Be careful. Clean dies to mirror finish.2. On square die, apply a drop. Neither too big, nor too small. Will depend on die size & your guess. On rectangular die, apply a line. When heatsink is pressed on to die, due to pressure it auto spreads consistently. Its preferred method, i did not go for spread method as it may sometimes leave air bubbles which is a no go.*pic attached with illustration on square/rectangular die & real application on rectangular die**************************BEFORE APPLICATION**************************Cold boot, no apps running, core temp was 63 Deg, CPU at 800mhzOn full load via prime 95After 2 min 95 deg & cpu at 1700mhzAfter 5 mins 95 deg & cpu at 1500mhzAfter 15 mins 95 deg & cpu at 1100mhzFan: at full rpm, continuously whirring.************************AFTER APPLICATION************************Cold boot, no apps running, after 15 mins core temp was 50 Deg, CPU at 2400mhzOn full load via prime 95After 2 min 79 deg & cpu at 2900mhzAfter 5 mins 82 deg & cpu at 2700mhzAfter 15 mins 82 deg & cpu at 2600mhzFan: less noise and triggers less. Very lesso n high rpmSo it appears like, huge difference in performance & power saving!! Its been a few days after application, n laptop seems to run cool & there is visible boost in performace on load.******************FINAL VERDICT******************So getting AS5 was not a bad investment! You can surely go for it. Just be careful in its application as though not electrically conductive, its capacitive & if not used in desired qty may spread out to small components on die & create trouble.Also be patient after application as it takes around 200 hours to cure or to reach its full capacity. Thats burn in time for AS5.

Prompt delivery! Item as described

A PS3 voltou a ter vida, produto TOP

works