Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
Met de SPVESAPLATE adapterplaat kan een VESA-compatibele flatpanel monitor, televisie of ander apparaat worden aangesloten op de steun van uw keuze (Mounts, houders en apparaten worden apart verkocht.) Deze unieke adapterplaat meet 4,75 inch (108 mm) vierkant en bevat VESA 75 (75 mm x 75 mm) en VESA 100 (100 mm x 100 mm) evenals voorgeboorde patronen met 4 gaten AMPS. Bevestig een metalen AMPS-compatibele adapter met schroeven (niet inbegrepen) op de plaat om uw eigen op maat gemaakte VESA-compatibele adapterplaat te maken. Dit omvat Akron Modellen APMAMPS25MM (25mm bal naar 4-gaats AMPS Adapter Plate), AP20MMAL (20mm bal naar 4-gaats AMPS adapterplaat), APM206MM (20,6 mm bal naar 4-gaats AMPS adapterplaat), APMAMPS38MM (38mm bal naar 4-gaats AMPS adapterplaat), of APAMPSEN 17MMAL (17mm Ball to 4-Hole AMPS Adapter Plate) die kan worden gebruikt om uw televisie of monitor te monteren met behulp van een boorbasis, klem of ander type montagevoetstuk (apart verkrijgbaar).
Anonymous User
5 augustus 2025
I used this for something a little different: adding metallic support on top of the ABS monitor housing to give some support for the VESA screws.I drilled four holes in the back of the ABS plastic on one of my monitors, and discovered the ABS was actually thick enough I did not need the nuts for now to hold the plate onto the back of my monitor.I may add them eventually but they did fit, they were just a little tight.Based on some reviewers comments, they are machine screws and you need to screw them in reverse a few times before going clockwise so that you don't risk cross threading them. You should also add a little grease to assist. I recommend using a crescent wrench first to hold the nut, then a Phillips screwdriver to pre-screw them in first. This should help loosen up the nylon inside.The VESA screw holes are not threaded but are in the correct locations. The four mounting holes in the center are counter-sunk.You may need to purchase your own nuts and bolts, depending on how you choose to use this.
Mr P Hargreaves
3 augustus 2025
Exactly what I needed to sort out a problem I was having with a recess in monitor to fit the vesa mount
Cliente de
10 mei 2025
De muy buen terminado
David Plewe
14 maart 2025
Massiv und passgenau
Dr.B.
4 januari 2025
Just perfect. I used the Arkon mounting plate to transform a Dell Quick Release Vesa 100 adapter plate to Vesa 75 for a portable monitor.I drilled larger holes at 75x75 on the Dell adapter plate so the screws of the Arkon would be accessible, and assembled the sandwich with rubber grommets as spacers. Works like a charm.
Aanbevolen producten
Misschien vind je dit ook leuk
Aanbieding
26,99€
67,99€