Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
"Enabling Ultra mode has no negative impact on measurements below the ULTRA START frequency so once Ultra mode is enabled there is little reason to disable the Ultra mode but if needed this can be done also using same CONFIG/MORE/ENABLE ULTRA command. The mirror and spur elimination is automatically disabled and enabled when CONFIG/SPUR REMOVAL is set to AUTO ([A]). It can be manually deactivated if not needed when using a pre-selector by setting CONFIG/SPUR REMOVAL to OFF ([_]) To summarize the disadvantage of measuring in ultra mode: Increased scan time Fails to capture very short duration signals Fails to capture scanning signals (e.g. from a sweeper) Shows false signals when using with very complex or wide signals. Ultra mode is disabled by default but can be enabled using the command CONFIG/MORE/ENABLE ULTRA using 4321 as the unlock code. Once enabled the ultra mode stay's enabled. Sometimes a FW update may require re-enabling. By enabling the ultra mode you acknowledge that you understand and agree with the limitations of the ultra mode.
