AV Access 1 in 2 Out UHD 4K@60Hz 1080p@120Hz HDMI 2.0-splitter met automatische downscaling, 18 Gbps nullatentie, 1 × 2 4K HDMI-splitter met HDR10 en 3D, HD Audio, HDCP 2.2, automatisch EDID-beheer

Great switch works !!

I bought these to attempt to get 4K HDR from my PC to my living room TV. I couldn't afford a more expensive HDBaseT kit (like the SEADA HBT70B) and this unit appeared to hit the sweet spot of features and price.I've tried a few scenarios and its operation is generally as expected. The LED indicators are useful as they reflect both incoming and outgoing signal presence, useful for diagnosing problems with low quality cable or cable runs which are too long and cause too much signal loss.The HDMI2 output with integrated downscaler appears to cause no observable degradation to image quality (banding or aliasing) and there's no noticeable signal lag.I've not tested with a sync signal or clap test but it looks fast enough to be used for things like theatre presentations / office AV setups - or even things like UHD and scaled HD simultaneous output from a video camera or vision mixer in a production environment.You could definitely use this unit in your output signal chain if you're a FPS gamer, the unit doesn't seem to add any meaningful latency.I've not yet been able to verify true 4:4:4 colour space and end-to-end audio bitstream pass-through, but I suspect they do work as advertised.My first tests:1/ Taking HDCP protected output from a Sky+HD box to a primary display (4K TV) and a secondary 1080p monitor plugged into the duplicating output. I was impressed by that, as Sky+HD boxes are notorious for detecting HDCP issues and 'bluescreening' the video signal. This means the unit could be used to repeat a Sky+HD HDMI signal to multiple TVs in a house, as I had no issue sending 1080p or 1080i25 down a long run of HDMI cable.2/ Outputting HDMI 2.0 4K HDR from a Windows 10 PC (GTX 1070) to the 4K TV worked OK, although the HDMI cable length and quality makes a big difference.With a longer run of cable (30 metre HDMI cable) I could not achieve HDR, only 4K SDR or 1080p60. I managed to get a 'sweet spot' of 4K HDR using shorter cables and positioning the unit at the midpoint, but only to a maximum of 30 Hz - that's fine for all film and TV content but frame rate in games will obviously suffer.I suspect the signal loss from my long run of cheap HDMI cable (about 30 metres) takes its toll on being able to achieve >30 Hz. I'm sure with a shorter run of HDMI, or using higher quality HDMI cables (I'm using cheap HDMI 1.3 cables with female-female adaptors along the run) - or HDMI-ethernet extenders - I would be able to do 60 Hz, 4K HDR.Without using more costly equipment and cabling you can't expect miracles, and you cannot beat physics even with super-expensive HDMI cable. (And what's the point in trying? HDBaseT is really the only option for >30 metre runs.)For my intended purpose - getting HDR UHD signals from a computer ~30 metres away to a TV, without using LAN streaming - this unit works almost exactly as I was hoping for.Used at a midpoint between the PC and TV, the unit does a great job to equalise the low SNR, poor quality signal from the PC, reclocking and boosting it sufficiently for the TV's input to recognise it. When I used a single run of 30 metre HDMI cable, the SNR was not good enough to even get full HDR, so I'm happy with the performance of these units.When connecting multiple displays, it's important to connect the highest resolution display first, so it can properly clone the monitor EDID and maximum resolution properly. The manual explains the process well.

Ero alla ricerca di uno splitter che mi consentisse di uscire con risoluzioni diverse sui due output HDMI, per sfruttare contemporaneamente la risoluzione 4K del decoder Sky Q sulla TV e la risoluzione FullHD sul modulatore HDMI che distribuisce il segnale sulle altre TV di casa. In pratica sono riuscito ad avere la botte piena e la moglie ubriaca! Restano da verificare la resistenza e la durata nel tempo, ma di primo acchito mi ritengo soddisfatto dell'articolo, che è arrivato in tre giorni dall'Inghilterra.

Für Sky geeignet. Endlich ein Splitter der UHD und Dolby Atmos auf den Denon Receiver und TV bringt. Sehr gut. 👍

Este splitter es compatible con HDMI 2.0. Permite enviar imágenes desde dispositivos con HDCP 2.2 sin cortar la señal.Transmite también señal HD 4K. Funciona perfectamente, al contrario que otros splitters que prometen las mismas funcionalidades. Un acierto total.

Ho acquistato questo articolo in sostituzione di uno più economico che mi creava problemi di segnale e devo dire che ho avuto un ottimo risultato su tutti i fronti. Consigliatissimo.