Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
jaap h
5 juli 2025
*Install digispark drivers before use on windows. I flashed 5 pieces with Arduino (sketch). But only 3 where working. I used a usb powered hub to make sure the voltage was ok and multiple scripts to test. I contacted AZ delivery for a solution (i have read there service is good) otherwise i have to return all boards.
Tim
21 juni 2025
Ik heb 5 boards besteld, 1 heeft nooit gewerkt, 2 stopten ineens met werken, andere 2 vergeten constant de code die geupload is
Gebruiker
14 juni 2025
Een maand geleden heb ik 3 digisparks besteld, en in het begin werkte ze goed. Maar na een tijdje detecteerde mijn laptop een van de digisparks niet meer, dus ik heb drivers geïnstalleerd en ik heb ook geprobeerd om het te resetten maar het werkte allemaal niet. En een week later gebeurde er precies hetzelfde met de tweede. Erg jammer.
Leo
17 mei 2025
1 out of 5 worked
Mr. Boombastic
11 april 2025
the tiny modules are well built en worked immediately. One thing to consider is buying a USB hub with ports that can be turned on and off. In order to upload the program code to the module you need to remove the module and then insert it when the IDE asks for it. So to prevent your USB port from damage I'd recommend a USB hub.
309Electronics
22 maart 2025
They work absolutely fine, loaded them with some arduino prank attiny 85 ducky kind of scripts and they work, trolled my friend and i used them in my project as tiny mcu board
Pablo
13 maart 2025
Se flasean bien en Linux. Solo tuve que añadir una regla en rules.d para que al insertar la placa el USB se reconozca adecuadamente, tal como se explica en muchos sitios en internet. Sin eso, no se detectará al ser insertada cuando el upload del IDE arduino lo solicita.
SansNO
18 februari 2025
Super et facile d'utilisation avec Arduino IDE.
natap
26 januari 2025
Sehr gutes Produkt zum Experimentieren. Lasst sich einfach programmieren mit der Arduino IDE.
Colin
9 januari 2025
I purchased a 125 of these for a specific project. They arrived promptly and all surprisingly worked which I wasn’t expecting.The big thing to note is none of them came with a bootloader or the blink program. So if you are trying to follow many of the tutorials out there and trying to program via arduino and usb, that wont work even if you install window drivers. You will need to load bootloader firmware via another device acting as an ISP.I used an arduino uno I have lying about. Loaded the latest micronucleus and after that usb worked great.The circuit board for these is slightly thicker than other clones I have used and it actually made the usb connector fit better.
Gianpiero
11 december 2024
I dispositivi sono arrivati in orario in una piccola confezione. Tutti funzionanti (il led lampeggiante conferma lo sketch) . Purtroppo farli riconoscere a W11 non è stato semplice. Il sistema li ha riconosciuti solo sulla porta USB primaria ed a forza di tentativi, tra software e driver, ne ho bruciato 1. In ogni caso funzionano,il costo é irrisorio e ne ordinerò altri.
Aanbevolen producten