AZDelivery 5 x KY-003 Digitale Hall Effect Sensor Transistor compatibel met Arduino Inclusief E-Book!

Not the same PCB sice and mountinghole dimensions as most other vendors.Horrible soldering not a single sensor was mounted the same angle/distance so all had to be re-soldered to fit in my application. Whorst packaging i've ever seen (bad packaging from AZDelivery, Amazons packaging was good as usual), the modules where just thrown loose inside an AZDelivery cardboardbox, rattling all the way only miracle nothing was broken. I have had no similar problems with items from this vendor before but this time makes me really hesitant to order from them again.

I actually needed just the sensor so I can replace a broken one in my entire wheel. I snipped one down, mounted it inside the motor and works like a charm. Thx for the quick delivery

Sensore utilizzato nel calcolo della variazione del campo magnetico nei dispositivi per ottenere la direzione e la velocità del vento in una stazione meteo personale.

There's not much to say about these. They're magnetic hall-effect sensors. Connect voltage and ground, and then connect the signal pin to a digital header. Like other HE sensors, one side detects north magnetic polarisation, and the other detects south magnetic polarisation.I've personally used them for window and door sensors with ESPHome (running on an ESP32 controller), making them ideal to integrate with Home Assistant. Cheaper than commercial sensors, significantly smaller, possible to connect multiple sensors to a single board, and no cloud service harvesting the open/closed state of the sensors.

Articles ok, bien emballés et envoi rapideTous ont fonctionné pour le montzge réalisé