BBB Cycling Nautilus II BTL-05 Kettingklinknagel voor fietsen tot 11 snelheden,

does the job

Der Nautilus II BTL-05 erfüllt seinen Zweck in bester Weise:- Sinnvoll dimensionierte Hebellänge von Spindelgriff und Gerätegriff.- Gut einstellbares Gegenlager, mit dem die Kette präzise in der richtigen Position fixiert werden kann (sollte man nicht mit voller Gewalt anziehen sons bricht der Gegenhalter eventuell wie bei einigen hier beschrieben ab. Eine normale fixierung ohne grosses festdrehen des Gegenhalters reicht hier völlig aus.- Wegen dieser Fixierung ist nämlich die Gefahr viel geringer, dass der Stift ungünstig/schräg drückt und sich verbiegt.- Der Druckstift ist austauschbar. Ein Ersatz-Druckstift ist am Gerät befestigt.Habe den Kettennieter ohne vorkenntnisse im Kettennieten heute bekommen und sogleich meine erste Kette genietet, funktioniert einwandfrei auch ohne große Vorkentnisse, eine kleine bebilderte Anleitung ist dennoch auf der Rückseite des Nieters vorhanden, die man aber nicht unbedingt benötigt , auch Laien sollten hiermit klar kommen und mit Sachten drehbewegungen den alten Nietstift audrücken sowie einen neuen einnieten, das der Druckstift mit zunehmender Dauer natürlich abnützt ist klar bei dem druck der auf dem Dorn durch das einpressen entsteht,Ich vergebe die volle Punktzahl in Handhabung und Anwendbarkeit.Und den Preis finde ich sehr günstig, im Vergleich dazu, was man dafür bekommt.

At 100 by 65 by 15 mm, this is a compact variation in a chain breaker tool. Its comfortable in the hand and small enough to fit into a saddle or frame bag. I've included a photo for reference, my hand is 190 mm from wrist to tip of my middle finger.I got this as I was rehabbing a trashed bike that found out by the bins. The chain on the 3x8 drive was seized and broke my existing no name chain tool that I got as part of an inexpensive tool kit. This quickly and effectively chewed through that seized chain and made shortening the 10 speed replacement a breeze. It includes a spare driver pin that is the same size. Effective for 8/9 and 10 speed, it will probably be fine for 11 speed. I wouldn't like to say if it was too large for 12 speed chains. The hole at the top of the handle is just the right size and shape to fit the driver pin, gripping it tight if you do need to remove/replace the pin.The included chain hook that is a 3rd hand to hold the chain in place while you work is a nice addition.At £15 it's reasonable price for a well made tool, and may well be the last chain breaker I will ever need.

Bof

The spare pin was not included. The spare pin was not listed on the package. There was no place to store the spare pin inside the product or on the open card it was zip tied to. I bought this specific product because the description said it had a spare pin. I foolishly believed the description and must shop again instead of having this simple need fulfilled.The chain tool itself looks and feels cheap. The metal part has scratches and surface irregularities in the form of small random bumps. The black rubber handle looks old and used, with scratches, scuffs, and a subtle white haze. I wouldn't mind these minor problems after I used the product a few times or stored it with other bike tools, but to see such low quality in something brand new sent the message that the factory did not care about what they were doing.I just checked the company's website. Their photo of a Nautilus II BTL-05 chain tool showed a notch next to the handle with a place to store the spare pin. The product shipped to me was different, with no notch, just a flat, angled surface. Evidently this version, labeled on the package as a Nautilus II BTL-05, is different and inferior to the one described here on Amazon. Again, I bought this one because it was the only one that offered a spare pin, a spare pin that I needed to replace one lost from a mini chain tool. I thought having the included spare pin would be convenient and save money. Now I have wasted my money thanks to wrong information in Amazon's product description. When companies redesign products, they should change the model numbers so customers aren't severely disappointed and angered after buying things and finding they don't match the descriptions. It is also the responsibility of the seller to accurately describe products and check them to make sure they match before sending them out to customers. Wrong information wastes everyone's time, but I guess it is good from the seller's point of view to keep customers ignorant and in the dark.I can't trust any product information now. It would have been easier to go to a physical store and see similar products first hand rather than be digitally lied to.- - -A comment was added after using the tool for the first time. I was impressed!

Solidità e sicurezza