Bosch Professional stofafzuiging GDE max (voor SDS max, Click and Clean System, compatibel met SDS max-hamers, SDS max sloop- en boorhamers)

I am very fortunate to have been able to review this at a perfect time. I started renovating two rooms. I took up the old chipboard floorboards and Jablite underneath to replace with PIR insulation and new chipboard.I found an extremely uneven concrete base with what seemed like mounds of random screed scattered around. I used an SDS and chiseled all this off which caused a silly amount of dust. Ended up blocking my nose for two days.Then this product came up so I thought I would give it a try. Used it in tandem with a Milwaukee SDS and because of how it attaches, it doesn't necessaril have to be used with a Bosch. The jubilee-type clip means you can attach it to virtually any SDS. Barely had any dust when chiselling with this. Didn't need to wear a mask, didn't need to clean much. Incredible.

This has made all the difference to dust extraction with an sds plus. I’ve been using with an old bosh sds and it fits seemingly anything as it clamps down on the body with a jubilee type clip. I’ve tried it with small and large chisel bits and the small was so good I could have done the work without a dust sheet, the larger piece meant the vacuum nozzle was further back so more dust escaped but still a massive improvement. It is expensive, it cost more than my bosh pro driver, but it’s very good quality and not sure if I mentioned this but does a brilliant job.

I have recently moved over to the Bosch Professional range and have to say that I am impressed with everything I have tried so far. This dust extraction system is no different. I have the rotary hammer and the dusts a debris is causes it always a bit of a problem especially when working inside a customers property. With this system attached to the hammer and the vac system running to suck up the dust the amount of dust and debris is reduced an incredible amount. the whole system is very easy to set up, I keep mine attached to my hammer at all times now but if you have other equipment you ant to sue it on it only take a few minutes to decouple and retouch to the other drill or hammer. I have the vac set up and this combined it just so much easier when it comes to cleaning up after the work. I highly recommend this system to anyone who uses the rotary hammer or SDS hammers etc... you will not regret it and your labourer will thank you LOL