Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Cable Matters 180102x100

14,99€ 28,99€
Gratis verzending bij bestellingen boven 25,99€

1.Maat:100-pack


2.Stijlnaam:Cat6a Pass-through


Over dit item

  • Cable Matters 180102x100



Productbeschrijving

Cat 6 Pass Through RJ45 modulaire stekkers voor massieve of gestrande UTP-kabel/Cat6-doorvoerconnectoren

DIY of PRO Patchkabel Essentieel

De Cable Matters Afgeschermde Cat 6A Pass through RJ45 Modulaire Stekkers bieden een eenvoudige en nauwkeurige manier om S/FTP gestrande kabel te beëindigen. Maak patchkabels op maat in de perfecte lengte voor 10 Gigabit Ethernet-toepassingen thuis of op kantoor. Eindig vaste of gestrande afgeschermde twisted pair kabel, 23 tot 24 AWG, met een buitendiameter tot 5,8 mm.

Hoogwaardige connectoren in een kosteneffectieve verpakking van 100 stuks

De combinatie van vergulde contacten in een heldere, stevige behuizing levert betrouwbare prestaties voor een netwerk met een 10 Gigabit Ethernet-classificatie.

Specificaties

RJ45 8P/8C met vergulde contactenCategorie Waardering: Cat 6A Compatibel met 23-24 AWG gestrande S/FTP-kabel tot 5,8 mm ODCompatibel met trekontlastingslaarzen (B0049QNV3E) Aanbevolen Pass-Through Crimp Tool (B08LNZ3D1X)

Cat 6 Pass Through RJ45 modulaire stekkers voor massieve of gestrande UTP-kabel/Cat6-doorvoerconnectoren

Pass-Through RJ45 8P/8C-connector

Doorvoer voor bedrading van 568A of 568B Corrosiebestendige vergulde contactenCompatibel met kabels met een buitendiameter tot 5,8 mm

Cat 6 Pass Through RJ45 modulaire stekkers voor massieve of gestrande UTP-kabel/Cat6-doorvoerconnectoren

Ontworpen voor vaste of gestrande kabel

Koppelingsclip voor frequent loskoppelenMetalen afscherming voor optimale signaalintegriteit3-Point gespreid contact

Kabel is belangrijk RJ45 Pass-Through Connectors

Pass-through connector beëindiging

Een krimpgereedschap (ASIN B08LNZ3D1X) ontworpen voor doorvoerconnectoren wordt aanbevolenEen spoelsnijder kan worden gebruikt om de draden bij te snijden, als er geen gereedschap beschikbaar is

Cat 6 SR Boot

Netwerkpatchkabel beëindiging

Geschikt voor Cat 6A-netwerkkabelVoeg een SR-boot toe om de kabelintegrityMate te beschermen met een kabeltrekontlastingsboot (ASIN B0049QNV3E)

Cat 6 Pass Through RJ45 modulaire stekkers voor massieve of gestrande UTP-kabel/Cat6-doorvoerconnectoren

Kosteneffectieve verpakking van 100 stuks

100x RJ45 pass-through connectorsHersluitbare doorzichtige containerDeksel met handige draaggreep


Terence
10 augustus 2025
My colleagues were using the cat6A RJ45 Connectors and found that it is not working. We had to try many attempts before only a few will work. Please check on the quality of the RJ45 as we cannot use even a single piece now as we are concerned about the quality.
Kindle Customer
8 mei 2025
Functional. And I’ve used much worse that cost more than these.
Eduardo A.
4 mei 2025
Tiene buena calidad y facil terminacion
Chris Hess
9 april 2025
The cables does not fit inside the connector. I have cables that are Cat 6A classified. I do not recommend these. These connectors are faulty
Mr. Fair
16 januari 2025
Bought these to go with True Cables clear cut to fit strain relief boots. So far I haven't had any bad terminations with 23awg cable. The boots thankfully fit inside with ease as the cable itself is a cat6a shielded riser cable that measures a smidge over 7mm thick. The outer cable sleeve will not fit inside but that is alright since the strain relief boots locks inside the plugs and I would rather have the shielded foil of the cable to fit snug inside.