CAMO C345002 Marksman Pro X-1 Wide Board Tool

I used this for the boards on my 50 square meter decking. Great fixing system, almost invisible when in place yet you can still get an individual board up if you need to.There's a couple of little tricks you learn and it's a good idea to watch and understand the Camo "how to" videos on YouTube. Especially the one about starting off the first row of boards by a wall.You do need to use their own brand screws because they're the other part of the system. So long as you understand this tool is just one half of the fixing system then you shouldn't have a problem with that.

Wow, is this thing great!I've been building decks off and on for 50 years. I've done "manual" blind screwing, hidden clips, and face nailing/screwing (many years ago). I wish this thing had been invented decades ago. My helper and I whipped out a 200 square foot deck in less than a day, and every single hidden screw is perfectly placed and holding tight- even the ones 1/2" from the end of the board at joints.Virtually no splits! The screws are designed with a tip that "pre-drills". (Because of this design they don't start easily when they're not driven using this tool. No problem though. For the starter board, where the jig can't be used, just hammer them in 1/4" or so, or drive a pointed screw in 1/2" or so. Or you can pre-drill for those few screws.I will have to return the 5 pack of special drill bits. The two that were included in the box of screws were still going strong for the last screw.

Funciona perfectamente

Beautiful results,

Todo bien