Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

chenyang USB 3.1 Gen 2 naar 5 SATA 3.0 Port Multiplier Extension Card Adapter voor Moederbord SATA Harde Schijf Port Extension met JMB575 JMS580 Chipset

16,99€ 31,28€
Gratis verzending bij bestellingen boven 25,99€

1.Kleur:Zwart


Productdetails

  • 1) Hoofdcontrole chip: JMB575+JMS580.
  • 2) Voldoet aan Seriële ATA 6Gbps elektrische specificatie 3.2;
  • 3) Voldoet aan USB 3.1 Specificatie Revisie 1.0, USB BOT Specificatie;
  • 4) Ondersteuning 5 poort SATA 6Gbps interface; Ondersteunt BIST en loopback modus;
  • 5) Ondersteuning command-gebaseerde en FIS-gebaseerde schakeling; Ondersteuning PM bewust en niet-PM bewust gastheer;


Productbeschrijving

1) Hoofdcontrole chip: JMB575+JMS580.
2) Voldoet aan Seriële ATA 6Gbps elektrische specificatie 3.2;
3) Voldoet aan USB 3.1 Specificatie Revisie 1.0, USB BOT Specificatie;
4) Ondersteuning 5 poort SATA 6Gbps interface; Ondersteunt BIST en loopback modus;
5) Ondersteuning command-gebaseerde en FIS-gebaseerde schakeling; Ondersteuning PM bewust en niet-PM bewust gastheer;


Rik H.
22 mei 2025
Tried using this card in my nas to have some extra ports for data migration. None of the 2tb disks were detected by the nas (truenas, latest version on 19*1*2024)Also read some extensive posts on the forum that they are a generally bad idea for a storage solution on the tuenas forums.Avoid getting these.
Anthony Angel
18 februari 2025
I bought the single m2 to sata adapter. Didn't work. It was not detected by the pc at all
Rodney
24 december 2024
Still running well after 6 months. Simple to install. Plug & Play. Too Easy.
aussiedeafman
19 december 2024
Installed in an Asrock ITX motherboard to increase SATA ports from 4 to 6. Working well.
Martinez Optus2
13 december 2024
I bough it for my low profile PC. I was expecting it to compatible with but not. No need to install drivers for linux enviroment. worked fine.
solemnwarning
23 november 2024
Once booted into an OS, both attached drives are accessible, but neither can be used to actually boot the computer.There is an onboard BIOS option ROM, but it doesn't detect any drives, since the same controller chip is used on some motherboards, where it is bootable, I can only guess the configuration is (disappointingly) hard-coded to not initialise/detect the drives.Also both of the included SATA cables were garbage and introduced lots of CRC errors and link resets - straight into the bin.