Cilio Porseleinen koffiefilter maat 4, wit

Good quality

atendeu ao experado

Är svårt att ha stabil på de flesta kaffekannor. :(

This is great for quick, mess free proper coffee. It will sit on most jugs or coffee pots. It is much nicer than plastic & completely dishwasher proof.

Ottimo articolo per fare un buon caffè filtro

I got tired of replacing the Mr. Coffee coffee makers I would buy every 4 years when they broke, and went looking for something that was easy to use, never broke, was easy to clean, and had no plastic to leach chemicals into my hot coffee. This is it.It's well made, has not given me any problems, and makes the best cup of coffee. It is to be used with a paper cone filter. It hols the filter, but doesn't replace a filter.First, which size should you choose? Multiply the "number" by 4 and that's about how many ounces of coffee you can make at one time. #4 makes about 16 ounces. You can make less of course, but note that the #6 is going to be very big and much heavier than the #4. Also note that the #6 filters aren't everywhere like the #2 and #4. However, you CAN put a smaller paper filter in, though the capacity will be that of the smaller filter. So you can buy a #6 and put in a #2 filter and make 8 ounces of coffee.Now, how is it that your local coffee shop's coffee is so much better than yours at home? Here are the secrets that they use but you don't. First, they grind their coffee a little courser than you would. Second, they use a lot of coffee per cup: 1.5 scoops. But the thing that really stands out is the fact that their filters are HUGE, so the water sits in the grounds for a lot longer than your Mr. Coffee and that pulls a lot more flavor out.So how can you get exactly the same results? Here's how I do it. It sounds complicated but it's very easy and very fast. And you can buy fairly inexpensive coffee and it still tastes great.Use 1.25 scoops per # of your filter. #4 filter: 4 x 1.25 = 5 scoops. Grind it coarser than you should for a cone filter, by about a full number on the grinder. But grind it into a pyrex measuring cup or other heat safe, pourable container.Heat up the water in a pan or teakettle on the stove (you can start heating the water before you grind the coffee so that the water is heating while you are measuring and grinding). For me that means filling the mug nearly full of water, pouring it into a pan and heating the pan on the stove. When it boils take it off. Water boils at 212 degrees, but the ideal coffee brewing temperature is 190-195. So I run it under a cold water tap for about a half second to bring the boiling water temperature down to ideal coffee brewing temperature..Next pour some of the water from the pan into the pyrex with the coffee in it, filling the pyrex about 2/3 full. If you still have water left over, put the pan back on the stove and cover it.Note that you could do it in reverse using a microwave: put the water with no coffee in the pyrex and heat it in the microwave, then add a dash of cold water when it boils and finally add the coffee. The problem with doing it this way is that the container might get too hot to be comfortable. If you use a pan to heat up the water, that won't happen.Next, take a chopstick or other wooden utensil and stir the coffee in the pyrex with the water until the top is smooth and has no clumps.Put the holder over your container (I put it right on top of my mug) and put a paper filter in the holder. Pour the coffee mixture from the pyrex into the filter, as soon as you can after you finish stirring the lumps out of it. If there is more water left in the pan, pour it into the pyrex and carefully (so you don't burn yourself), swirl it around to pick up any remaining coffee grounds and pour it into the filter, being careful not to overflow the filter.Now you are ready to walk away and let it drip. At this point, I clean the chopstick and the pyrex.When you can no longer see a pool of water in the coffee filter, it's ready to add cream, sugar, etc and drink. It's every bit as good as coffee you get in a coffee shop.