COMGROW PEI Drukplaat, gestructureerde/gladde dubbelzijdige PEI-vel 235 mm x 235 mm voor Creality Ender3/Ender 3 Pro/Ender 3 V2/Ender 3 S1 Pro/Ender 3 Neo/Voxelab Aquila 3D-printer

What can I say, this thing is tough. In the manual they say you should sand it after around 2 years of use. I already sanded it 6 times in a little over a week after successive mistakes made while experiment with many settings, filament and the newly installed CR touch.It was able to resist the ultimate destruction by a ruby nozzle (a scar that will be difficult to forget). It took superglue, acetone, 80 grit sand paper and even some fire. After all this beating it still has PEI film left on the plate and still saves me from the frustrations of the stock plate. I print ABS and ASA without having to use any glue in it (although the enclosure is essential for ABS) and everything works perfectly on it (even if it prints over the ruby scars).This is a mean plate, that took a lot of acetone showers with sand paper as a sponge.By the way. Don't worry about scratches, they occur easily but have no effect on the functional aspect of the plate.The plate is currently busy doing my bidding, but I will add a picture later as proof of its mishandling. I already bought a new one as I plan to give it a break after so much hardship, but I believe it still has a long future ahead. I will probably use it for more experimental prints and keep the new one for the tried and tested ones to keep it new.PS:It has finished its work for now, see pics.

With the bed i have no problem with ABS. It sticks good while printing and almost always let go when the bed has cooled down. When its didnt let go already it's pretty easy te remove. I wished i had bought this instead of a glass bed

Voor de PEI sheet had ik een glasplaat. Het was onmogelijk om de print eraf te krijgen. Met de PEI sheet komt het veel sneller los en heeft een mooie textuur aan de onderkant. Had ik véél eerder moeten hebben.

Dit bed is 2 zijdig te gebruiken. Voorzien van een geruwde en een gladde kant. Zeer professionele resultaten mee te behalen mits de juiste temperatuur wordt ingesteld. Gebruik de juiste schoonmaakmiddel. Bijvoorbeeld 99.9 % Isopropyl. Wees voorzichtig met ruwe voorwerpen op de gladde kant. Schoonmaken met plastic of gebruik van nagels kunnen de PEI coating aantasten. Hierom 1 ster minder. Verder tevreden over het gebruik.

Like the title says. This thing is amazing

Always had to use glue or painter tape to make the filament stick, also tried to smooth side of the bed, same problem. And yes it is level (with mesh using Klipper). Did read about PEI sheet, and tried this one. Just one word, unbelievable, sticks all the time. Removing the object takes a second, no pulling or whatever. Very easy to install. Have only tried with PLA so far (different brands).

Good bed

Matje zelf ziet er goed uit echter is het magnetisch vermogen zeer slecht waardoor het snel verschuift. Orgineel is vele malen beter.

Veramente ottimo e molto pratico

Looking forward to upgrade my stock bed with this magnetic bed!

Mükemmel..

Llevaba tiempo con un cristal en mi Ender, y el cambio a bandeja magnética ha sido una MARAVILLA. Las piezas se retiran sin necesidad de espátula y el PLA se adhiere perfectamente. MUY RECOMENDABLE

Fácil de instalar, quedo exacta a mi ender 3 V2, con este aditamento te olvidas de estar poniendo fijador de cabello a la plancha, y se retiran muy rápido, aún me faltan probar varios materiales, pero con PLA funciona muy bien,