Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

DAKCOS T20 lange bit, Torx Bit T20, S2 bitset, 1/4 zeskantschacht schroefbit (lengte: 50 mm, 10 stuks)

4,99€ 8,99€
Gratis verzending bij bestellingen boven 25,99€

1.Maat:Ph2


2.Aantalitems:1


Productdetails

  • T20 Bit x 50mm lengte schroevendraaier bits, 10 stuks per doos
  • S2 stalen kop, gehard en gefosfateerd oppervlak, hoge corrosiebestendigheid. Geschikt voor industrieel gebruik
  • 1/4" zeskantschachten geschikt voor elke standaard schroevendraaiers en boormachine
  • Ideaal gereedschap voor reparatie, sterkte en flexibiliteit
  • Geschikt voor elektrische schroevendraaiers, handschroevendraaiers, elektrische boormachines en elke standaard boormachine


Productbeschrijving


LT20
LT10
LT10
LT10

3d climbing
27 mei 2025
Buoni funzionano
Lennart Norrman
17 mei 2025
Jag har inte fått leverans
Mickael Schneider
15 februari 2025
J'ai récemment acheté ce lot de 10 embouts Torx T25 DAKCOS de 50 mm et ma première impression est très positive.La qualité de fabrication a l'air tout à fait au rendez-vous. Les embouts semblent solides et bien usinés (acier S2 mentionné, ce qui est généralement un bon indicateur). Reste à voir leur tenue dans le temps et en usage intensif, mais le premier contact est rassurant.Un gros avantage : ils sont aimantés ! C'est vraiment pratique pour maintenir les vis en place, surtout quand on travaille d'une seule main ou dans des zones peu accessibles.Enfin, le fait d'avoir un lot de 10 pièces est un vrai plus. Pour un embout aussi courant que le T25, que l'on a tendance à égarer ou à user, avoir du stock évite de perdre du temps à chercher celui qui manque ou à devoir en racheter en urgence. Avec ce lot, je suis paré pour un bon moment.En résumé, je suis satisfait de cet achat qui répond bien à mes besoins. Bon rapport quantité/qualité apparente/prix.
van wanghe
18 januari 2025
Très bon produit je le recommande
FrozenMetroid
11 december 2024
These 10-piece torx impact bits are nicely laid out in a plastic tray with a plastic lid. It is a sturdy plastic tray so offers good protection for the bits inside. The case is split into three compartments and the bits lie loosely inside their individual cavity. Each torx bit has its size stamped onto it for easy identification. They are all the same size, which is a T20, so this set is ideal if you use this size a lot. Each torx bit is made from S2 alloy steel which is strong and hard wearing.I had a torx screw to remove from an old brake disc I was changing, and it wasn’t budging with a normal wrench, so I used one of these in my impact drill. The impact loosened the screw and the splines on the torx bit was still in perfect condition. Granted, this wasn’t the hardest work I could have given it but it’s the job I had to use them with, and they worked flawlessly.I feel this is a decent torx set for a reasonable price. I really like how they come in a plastic case as it does a good job of keeping them organized and are easy to remove when needed but for the price, I can’t fault the set at all…