Winkelwagen is nog leeg.
Winkelwagen is nog leeg. DIN Rail Mount Schroef Terminal Block Breakout Board voor ESP32-DevKitC. Met het breakout-bord kunt u ESP32-DevKitC-projecten eenvoudig uitbreiden naar industriële besturingstoepassingen.
Hoge kwaliteit Taiwan DINKLE Vuurvaste nylon materiaal DIN-rail mount drager, kan breedte 35 mm / 32 mm / 15 mm rail ondersteunen, en de drager kan uit elkaar worden genomen voor gebruik op paneelmontage. FR-4 glasvezel PCB, dubbele koperen lagen.
PCB-montage aansluitblok: steek 5.0mm/0.197", striplengte 7mm, schroeven - M2.5, staal, Cr3+ Zn plated. pin header en kooi - messing. Draadbereik 28AWG ~ 12AWG / 2.5mm vierkant.
Opmerking: het item bevat geen ESP32-DevKitC-module. Het breakour board ondersteunt ESPRESSIF officiële ESP32-DevKitC, maar we garanderen niet of we modules van derden ondersteunen, u kunt de officiële website van ESPRESSIF voor meer informatie raadplegen voordat u koopt.
CAD 3D (pdf): https://m.media-amazon.com/images/I/B1YqKauRTIS.pdf
Perry Mason Fan
6 augustus 2025
I bought this device on May 27, 2024, it took several more weeks to get my test rig components ordered an configured. The I spent another couple of weeks writing code on for an ESP32 to use this device and finally the last 3 weeks trying to debug my code to no avail. It turns out this device is defective, the top row of the pin connectors do not work properly. The other rows of pins work correctly and I need that last row for all the components in the test rig. Now it is past 30 days and I have to buy another one to get the test rig configured. Make sure you check this device out as soon as out get it!
Customer
1 augustus 2025
Funciona perfecto.... pero la base no es compatible con esp32 nocum de expressif..
Neuronscream
4 mei 2025
The construction is solid and this fits well on my 35nn Rail. When I got this in, I had failed to read that it was supporting the ESPRESSIF official ESP32-DevKitC versions. The dual row headers work just fine for the off brand modules that most of use have purchased from China. The only thing you have to account for is the pin offset if you are using a module that is shorter than the full pin out. I tried several that I own and had no problem getting the breakout to work for me. That said, I would recommend purchasing the official modules unless you really like counting pins.
Zaac
17 februari 2025
De media kon niet worden geladen.
B. Blum
5 november 2024
I like to tinker with ESP32 devices mainly for home automation type projects. I picked this up mainly to use for prototyping and designing new projects as it makes it super easy to hook up to the pins and change things around. I like that this has two rows of connectors for the ESP chip so you can use this with both wide and narrow dev boards. The screw down terminals bite down perfectly on small gauge wire and dupont style wire leads making it very easy to interconnect various modules. The board itself and the components are very well made and sturdy and I also like that there are plenty of extra ground and 3.3v terminals to tap into. Overall very pleased with this and would definitely get it again and perhaps use it in a permanent setting if a project lends itself to DIN rail mounting.
Aanbevolen producten
Misschien vind je dit ook leuk