Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

disty box 300 telefoonadapter, universele adapter voor analoge bekabelde telefoons, fax, multifunctionele apparaten aan DECT/Gap basisstations of routers

59,99€ 125,07€
Gratis verzending bij bestellingen boven 25,99€

1.Stijlnaam:Single


Productdetails

  • De distybox 300 is een universeel inzetbare, draadloze adapter (DECT-standaard) voor de werking van analoge eindapparaten op GAP-compatibele DECT-systemen
  • Met de eenvoudig te monteren distybox 300 kan de locatie voor apparaten in het huishouden of kantoor onafhankelijk van kabelverbindingen worden geselecteerd
  • Dankzij de veelzijdige werking van het DECT-telefoonstopcontact is de aansluiting van vele installaties met RJ 11-stekkers zoals deurhandsfree-systemen mogelijk
  • Het telefoonstopcontact kan met basisstations binnen hun gebruikelijke bereik, in gesloten ruimtes 50 m, buiten tot 300 m communiceren
  • De 12 x 10 x 3,8 cm kleine distybox 300 wordt geleverd met stekkervoeding en kan door 2 haken aan de achterkant eenvoudig en stabiel worden gemonteerd


Productbeschrijving


Afbeelding 1
Afbeelding links

Afbeelding rechts

Compatibel: FRITZ! Box en Speedport Neo

Distybox 300, draadloze TAE voor DECT/GAP basis

Voor het aansluiten van multifunctionele apparaten, fax, snoergebonden telefoons

distybox300 is de draadloze oplossing voor het aansluiten van analoge apparaten

binnen het gebruikelijke bereik van je DECT/GAP basisstation.

Hij is speciaal ontwikkeld voor het huishouden en kleine kantoren en

wordt heel eenvoudig met behulp van een analoge telefoon op je persoonlijke

toepassing ingesteld. Bepaal de locatie van je eindapparaten

en wees vrij van kabelverbindingen.

  • Deurhandsfree-installatie zonder extra TK-systeem
  • Meetwaardeoverdracht voor telemetrietoepassingen
  • overdracht van signalen, zoals alarmsensoren
  • Inschakelen van gegevensterminals, zoals B. Point of Sale Terminals (POS)
Afbeelding onderaan

Het DECT-telefoonstopcontact

Toepassingsgebieden:

Aansluitmogelijkheid aan DECT/GAP telefooninstallatie of bestaande

Draadloze telefoon voor willekeurige analoge apparaten zoals:

fax, telefoon, antwoordapparaat

Modem (tot 9600 bit/s)

Afbeelding links

Afbeelding rechts
  • Frequentiebereik: 1880 MHz tot 1900 MHz
  • Zendvermogen: 10 mW in het midden
  • Spraakoverdracht: 32 kbps ADPCM
  • Faxmodus: Groep 3, V.29 maximaal met 9600 bit/s
  • Modemmodus: 9600 bps maximaal
  • Maximale Drie standaard telefoons parallel aansluitbaar
  • Bedrijfstemperatuur: +10 tot +40 graden Celsius
  • Relatieve vochtigheid: 20% tot 75%

Technische gegevens:

  • Standaard: DECT
  • Geschikt voor GAP
  • Automatisch inbrengen in DECT-basis
  • Plug and Play
  • CLIP-overdracht (oproepnummeroverdracht) via FSK1, protocol volgens ETSI-standaard
  • Keuzeproces: DTMF
  • Interne bemiddelingsmogelijkheid
  • Interne antenne

Instec Telecom
24 juli 2025
Es un aparato que ya utilicé cuando lo distribuia otra marca, y es exactamente lo que buscaba, funciona perfectamente, y tiene muy buena cobertura de recepcion y emision.
bidouille
9 april 2025
Je me demandai si un tel boitier existait et bien oui, j'avais besoin d'avoir un point d'accès téléphonique pour une imprimante multifonction avec fax.Ce système nécessite une base DECT avec une capacité d'accueil multi base qui n'est pas déjà utilisée à plein.Une fois la synchro faite avec la base pas de souci, sauf un, désactiver l'imprimante pour qu'elle ne décroche pas au bout de 2 sonneries puisque c'est une installation de dépannage pour le télétravail au cas ou j'aurai besoin de faire un fax.Fait le taf comme un point d'accès wifi mais pour le téléphone et forcement DECT compatible GAP.
moojuice
25 december 2024
Brought this for a couple of reasons.- Wanted to reduce the number of telephones actually connected to my real landline to minimise broadband inteference and increase broadband speed. Only have 1 DECT base station connected (Gigaset N300A IP) and everything else is now on DECT or this box. Broadband speeds are at their max.- Several analogue phones & intruder alarm dialler are analogue. In 2025 British Telecom will switch off the PSTN analogue network so I wanted an ATA that would work with my existing Gigaset DECT base. That talks DECT GAP on one side and PSTN and SIP/VoIP so I can keep using those old phones with Distybox. Note for outgoing calls, you can choose either PSTN or SIP to route from the Distybox, not both, with a Gigaset N300A IP.Call quality seems pretty reasonable. Relatively easy to set up. If you have changed the DECT base station PIN, change it back to 0000, then allow the distybox to pair, before changing the PIN back on the DECT base station.Did find the distybox was double dialing so used command **9 when first powered on then 40 1# to resolve that issue, then hang up.Product came from Germany and whilst it had a Euro to BS1363 3-pin UK plug adaptor with the product, it did not come with an RJ11 to BS 6312 431A British Telecom style socket adaptor. That did not matter to me, as I was aware it would not come with one and instead used an RJ11 to RJ11 lead, a surface mounted RJ11 socket box and linked into my old telephone extensions around the house which had been disconnected from my original BT master socket (to improve broadband speeds).Also, if you are a UK user, get an RJ11 to BT "BS 6312 431A" socket and if the phone does not ring, use an ADSL/VDSL microfilter too, as that will have the ringing capacitor in the microfilter to make your phone ring.Two critisisms of the box:- It can only supply a ringer current REN of 3. If you, like me, have some genuine GPO era telephones with proper bell sets on them, the ring is on the weak side. Would like at least 4 or 5 REN. Disty, if you are listening, think of some of the old phones people might want to connect to the product.- It does not support pulse (loop disconnect) dialing. I read the instructions prior to purchasing so knew this limitation, but it is a shame and I think pulse to DTMF conversion would be something they could handle in the firmware, if they tried. Disty, if you are listening, please do this, as your box could help keep old telephones in use!
Kunde
7 december 2024
Das Verbinden mit dem Router war so einfach und unkompliziert wie das Anmelden eines DECT Mobilteil. Super einfach, unkompliziert und innerhalb 1 Minute erledigt. Zu 100% zu empfehlen!
Dario
27 november 2024
Il dispositivo funziona benissimo e mi ha consentito di collegare un vecchio telefono analogico alla funzione DECT del mio FritzBox 7590. La prima configurazione è abbastanza semplice, in quanto, al primo avvio il box va direttamente in modalità di ricerca base. Diventa un po' più complicato registrare il dispositivo ad una base differente, perché bisogna utilizzare la modalità di programmazione e - non essendo dotato di un display - è decisamente più complicato, ma perfettamente fattibile. Assolutamente soddisfatto