Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Draper 14159 Kogelgewricht Separator, 19mm, 25,5 cm x 6,8 cm x 2,8 cm

6,99€ 15,13€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Gesmede koolstofstalen behuizing
  • Vergulde afwerking
  • Met kaakopening 19mm
  • Keeldiepte 70mm
  • Afmetingen: 25,5 cm x 6,8 cm x 2,8 cm


Productbeschrijving


Draper

Over Ons

We zijn een onafhankelijk familiebedrijf. Het begint met onze oprichter Bert Draper en zijn vrouw Emily. In 2019 vieren we ons honderdjarig bestaan. Draper is ons kernassortiment kwaliteitsgereedschappen die geschikt zijn voor zowel liefhebbers als handelaren.

Draper 14159 Kogelgewricht Separator, 19mm, 25,5cm x 6,8cm x 2,8cm

Gesmeed carbon stalen behuizing met vergulde afwerking, met kaakopening 19 mm en keeldiepte 70 mm. Alle Draper-gereedschappen worden vervaardigd van hoge kwaliteit die strikt worden gecontroleerd door onze kwaliteitscontroleingenieurs. Draper Tools is een familiebedrijf dat al meer dan 90 jaar hoogwaardige gereedschappen maakt voor het Verenigd Koninkrijk en daarbuiten. Om iemand de tool te bieden die je nodig hebt, koopt het Draper-inkoopteam innovatieve producten.


P. Greenwood
30 mei 2025
Used thixs on my lower BJ mounting on my 2011 WV Passat. Couldn't get the standard clamp type in woithout removing the hub and that was definately not coming off (broke a knuckle bar trying). So, this being low profile was worth a go. Worked like a dream! Had them both off in a matter of minutes with the hub in situ. Saved me a lot of time.Good price, good quality tool.
Client d'
21 maart 2025
Bonne fourche pas encore cassé
Stan
10 december 2024
Works quite well as long as you are replacing the ball joint!
Arnaud M
9 december 2024
J avais une rotule de suspension avant sur ma bmw e46 completement bloquée, même avec un extracteur à vissé impossible de la déloger, cet outils me la fait sauter en 5 coup. Parfait
P32B
20 november 2024
Seperated top ball joint on my Hyundai Terracan perfectly.It is the type that will destroy the rubber so if you need to put the balljoint back on this is not for that job.The balljoint was so stuck that this ended up diggingslightly into the mount before it would free up but the tool was not marked.Really tough and does the job perfectly.

Misschien vind je dit ook leuk