ElectroCookie Grote PCB Prototype Board Kit Soldeerbare Breadboards voor Elektronica Projecten Compatibel voor DIY Arduino Soldeerprojecten, Verguld (6 Multi-Pack, Blauw)

Hervorragende Qualität!

Having just made an almighty school boy error using perf board (wiring like a spiders web), I saw this board. So I bought some. Well I no longer have a spiders web. This has made my project smaller and neater due to it being connected like a breadboard. I used one set of power rails as an I2C bus and that works great. It good that the power rails are separate but you can join them if you require. In fact I did this to join the middle and bottom ground rails together. I always had issues with perfboard when trying to join holes together to create a rail or just joining several components together. But with this board the rails are already connected. If you can create a circuit on a breadboard than you can simply lift and place directly on the board and it will work, no hassle of how to connect things. I will be buying more of this in the future, SO yes this stuff is great.

ブレッドボードで確認した回路をそのまま実機に実装するには、ショックなどで接触不良や配線が外れるなど懸念がある。また、直ぐに基板作成ができない場合はブレッドボードのレイアウトのままこの基板で最小の時間やコストで、実機実験が行えたのでとても便利でした。配線はラッピングポストを立ててラッピングワイヤーで行った。従って回路の修正（配線の修正）があればブレッドボードで確認して、確認を終えたらこの基板に反映できます。この基板のレイアウトがブレッドボードとほぼ同じであることが恐らく使いやすいポイントなのでしょう。

Très bon produit, après un premier prototypage sur des Boards de même principe, mais sans soudure, l’avantage est ici de pouvoir tout souder, et ainsi avoir un prototypage du montage plus fiable.Je recommande ce produit.

I've tried a few brands of prototype breadboards but I really like these. Two things I appreciate are that they are two-sided (solderable on both sides), and that the traces are exposed on one side. I like exposed traces because occasionally I need to cut the trace. The only way to cut a trace on a board with internal traces is to drill out one of the holes, which I've only done once and I'm not sure how reliable that is. Anyway, I used a scribe pen with a carbide tip to cut the traces on this board and that worked well. Exposed traces can also, in theory, carry more amperage because they can dissipate heat better being exposed.I looked for the copper weight for this board but I couldn't find it. The standard copper weight is 1.0 oz/sq ft so I assume that's what it is, but I don't know for sure.