Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad
5/5
2 Recensies

ESP32-S3 Development Board with 1.28inch Round Touch LCD Display,32-bit LX7 Dual-core Processor,Support 2.4 GHz Wi-Fi and Bluetooth 5(LE),Embedded GC9A01 Driver And CST816S Touch Control Chip

15,99€ 29,50€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Equipped with 32-bit LX7 dual-core processor, up to 240MHz main frequency.Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
  • Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory.Type-C connector, keeps it up to date, easier to use
  • Onboard 1.28inch capacitive touch display, 240×240 resolution, 65K color.Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture.
  • Onboard 3.7V lithium battery recharge/discharge header and 6 × GPIO pins via SH1.0 connector.
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.Integrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functions


Productbeschrijving

ESP32-S3 Development Board, With 1.28inch Round Touch LCD, Compact Size, Accelerometer And Gyroscope Sensor
Features
ESP32-S3-Touch-LCD-1.28 is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.28inch capacitive touch display,
Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it
into products quickly.
ESP32-S3-Touch-LCD-1.28
1.Embedded GC9A01 Display Driver And CST816S Capacitive Touch Control Chip
2.Small Size, Touch More Possibilities
Suitable For Various Smart Devices Development, Can Realize Human-Computer Interaction Function
What's On Board
1.ESP32-S3R2
The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 2MB PSRAM
2.W25Q128JVSIQ
16MB NOR-Flash
3.CH343P
USB to UART chip
4.ME6217C33M5G
800mA output, low dropout, high rejection rate
5.ETA6096
high-efficiency Lithium battery recharge manager
6.QMI8658
6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer.
7.MX1.25 battery header
MX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging
8.USB Type-C connector
supports USB1.1 hosts and slave devices
9.RESET button
10.BOOT button
Press it before resetting to enter download mode
Development Resources
https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-1.28?Amazon
Package Content
ESP32-S3-Touch-LCD-1.28 x1


Burgess Family
24 juli 2025
The development software required to make images on the screen crashes when trying to install.
pan51
20 januari 2025
With Arduino IDE it's bound to esp32 board version 2.0.12, see documentation. Unfortunately there are no custom partition tables with this version, which are needed to include lots of images in the application.

Misschien vind je dit ook leuk