EXERPEUTIC 975SL All Inclusive Heavy Duty 350LB Capaciteit Inversietafel met Air Soft Enkelkussens, Surelock en iControl Systemen

I researched all of the available inversion tables and decided on this one because of what was offered in features and the price $279+free standard shipping.Originally I did not want to spend more than $100 now because years ago I had an original unit for $100 in the past, however after looking at many I thought it was better to spend the extra money for the adjustable on the fly locking angle instead of cheaper units with the strap and also the larger air ankle pads were going to be more comfortable on my ankles since I remember the typical smaller black foam ankle holders hurt my feet/ankle etc.I ordered it on Sunday with the Amazon deal of free ground shipping, shipped from the Cally Manufacture facility to a mile down the road to the Amazon Warehouse. It was delivered on Thursday by UPS and arrived in perfect condition except a 2" hole in the hollow part of the box which did not affect anything inside. I do not recommend paying the extra $50 for expedited delivery as long as free shipping is available - I saved $50 I didn't need to waste.Instructions are very very easy, parts are layed out in sections on a placard board, however there is a error on the parts list/instructions either part 5 or 6 instructions there are only 4 flat washers not 6. Tools are provided in the box but I used my own tools which were easier, assemble was about 1.5 hours. I would say do not over-tighten the screws into the plastic parts and do not over-tighten the 2 small bolts that screw into the front center metal tube that swivels for the front air pads (the metal of the round tube is very thin.Also, I would say when you assemble the back pad to the machine you do need a second person to hold the back pad in place while another inserts the bolts thru the u-channel brackets etc.I adjusted my height with the center shaft and lock the spring pin in place and tighten the black screw tightener knob underneath the shaft and you are good to go. I am used to hanging upside down so its easy for me to hang for 5 minutes or more depending on my goals. I have severe lumber L3-S1 issues and recently hurt myself and had to purchase this to solve my pain. Just bought it so usually my pain will go away after about 2 weeks of using this every day twice per day always has resolved my serious rehabilitating pain.I would say for the money you cannot go wrong however there are a couple areas that could have been made stronger or thicker-that is the air pads attach with 1 screw each however the bracket built into the air pads should have been made with a 2 screw per air pad bracket. There is a small amount of play in the gear locking mechanism at 90 degrees if you try to do sit ups a little rockin but if the angle lock is less than 75 degrees its not apparent in a sit up mode. I do not do sit up on it I only hang and that is it's main duty as far as I am concerned.Buy It, Easy Instructions -Anyone can assemble it, Use It, Relieve the Pain - It works I have been using inversion tables for years and they work, saves me thousands of $$$ from going to chiropractor, pain lumbar epidural hospital injections, NSAID, Ortho docs etc.

Es la primera tabla de inversión que compro, pasé mucho tiempo para decidirme, ya que me parecía cara, investigué otras mas baratas, pero no me convencían, puedo variar el ángulo de inclinación lo que yo quiera sin necesidad de bajarme y hacer algún cambio. Para sujetar los pies, me parece de lo mejor, muy cómodo.

Lätt installera, perfekt!

Le choix a été difficile. Je m'étais démoli les chevilles sur une table avec fixe cheville classique que m'avait prêté un ami. A éviter.Donc, quelques heures de recherche plus loin, je me suis arrêté à ce modèle. Beaucoup plus cher que prévu, mais si c'est pour avoir peur de monter dessus à cause de la douleur, vaut mieux passer son chemin et essayer d'autres méthodes pour se relaxer le dos.Déjà, paquet reçu en parfait état, ensuite, le montage !! alors là, bluffé par la visibilité des pièces , toutes rangées par étape, sous blister ( voir photos ) et, même un gosse de 5 ans arriverait à assembler le tout.Moins de 30 minutes plus tard, l'engin était monté !!! J'ai quelques clefs à cliquet et ça m'a aidé à aller plus vite. On compte 10 minutes de plus plus pour le déballage et le rangement après.Impression de solidité, de sérieux, tous les trous sont en face, rien à bidouiller, du haut de gamme sans problème.Pour déplacer la table vers son lieu de villégiature, je l'ai plié. et là aussi facile comme tout, elle sera donc facilement rangeable le jour ou j'aurais l'utilité de la pièce autrement. Par contre vaut mieux être 2 pour la déplacer , il y a quand même 32 kg.Ensuite , l'étape suivante, c'était de monter dessus. Pas déçu du tout, les chevilles sont complètement épargnées, aucune douleur, mise en place facile, le frein est extraordinaire et permet d'attraper l'angle qu'on veut ou celui où on se sent le mieux, le matelas est épais, confortable.Que du bonheur !!!Maintenant à voir, au cours de l'utilisation, comment ma table va vieillir, mais je ne m'inquiète pas vraiment.Alors si vous avez un budget qui permet ce genre de table d'inversion, c'est LA table qu'il vous faut .merci Mr Exerpeutic.

Perfect I have been waiting years for this inversion table I have 2 compressed vertebrate I don't go fully inverted but just enough to take the pressure of and it's helps with the pain a lot. It's very sturdy and I'm not the lightest person and yes it's not cheap but you get what you pay for.