eXtremeRate Face Clicky Kit voor Steam Deck LCD Console, Tactiele Toetsen D-pad/View/ABXY/Menu Knoppen Muisklik Set voor Steam Deck LCD Console - Geen Console

La pulsacion se ha reducido notablemente, facilitando el juego. Aunque la instalacion parece complicada, es mas sencilla de lo que aparenta, y el producto incluye multitud de recambios para las piezas y tornillos por si se pierde alguno en el montaje.

Ottima mod, per quelli che rimpiangono i vecchi bottoni a microswitch simile a quelli del GBA, con la differenza che questi cliccano parecchio di più.

The clicky is satisfying. It is not a bottom click like on the directional pad of the xbox series controller, but more of an extra layer button to press.There’s an adaptation process, but i feel like it makes the button more precise and satisfying than original steam deck buttons.I couldn’t play any game using the directional pad since the mushy feeling was disappointing and the precision was not great. Now it is finally possible.

Short quick tip before the review: Just in case you're reading this and aren't aware, there are two different kits, this kit is for the LCD steam deck and there's another on extremerate's store for the OLED version of the steam deck.I was a little nervous to purchase these given I heard some mixed experiences around clicky kits, but wow am I glad I did. I always hated the mushiness of the steam deck d-pad, this kit is what the steam deck dpad should've been.I've seen comments around it being "fatiguing to push" and I just can't relate at all - the button stiffness is less than that of a vita (what I'd call very stiff) and even less than something like a 3DS. It's most similar to something like a Switch, but with more "depth" and spring (in a great way). To me it's just about perfect in terms of pressure required.I thought the install process was incredibly straightforward and easy. If you've assembled a PC (which if you're buying a steam deck I assume you've done at least once), you can easily do this mod. Just take your time and be careful - the whole thing from beginning to end took me less than a couple casual hours with lots of coffee breaks.Extremerate's youtube channel has a step-by-step guide that shows you every single disassembly and reassembly step. It's possibly the best video guide I've ever watched - extremely thorough and well shot. Big props to extremerate for this - I'm very impressed at how much time and thought went into all aspects of instruction.The main caveat/downside you need to know with this is that if you decide to go back to "non-clicky" you'll likely need to get replacement "sticker sensors" for your dpad/face buttons. This is unavoidable if you want to try clicky buttons as the "click" is built into extremerate's contact sticker. I guess you could try to reuse the originals after peeling them off, but I wouldn't recommend it.Speaking of which, I've seen the peeling of the button/dpad sensor sticker mentioned as the "hardest part" of the process, and I honestly can't imagine why. As the guide instructs, simply use a blow dryer to get the original sticker sensor off the face button/dpad plate. You by NO MEANS need to use a heat gun or anything intense. Just hold a blow dryer on its hottest setting for a minute or two (I was probably a few inches away while holding), and the contact sticker will peel right off.All in all, if you're a little disappointed with the Steam Deck's face buttons and/or d-pad you MUST try this kit, it is absolutely incredible. Above and beyond my expectations!

Der Einbau benötigt einen Fön oder besser Heißluftpistole, tatsächlich geht es aber wohl auch ohne. Sonst ist der Einbau weitgehend einfach, einige Schrauben und Module entfernen, die Kontaktstellen für die Knöpfe sind aufgeklebt, mit dem Fön soll man den Kleber aufweichen, die Kontake anziehen und die neuen aus dem Kit anbringen.Ich hab bei der Gelegenheit auch mein altes GuliKit, das bereits eine Deadzone hatte und udem vom falschen Typ A war, durch das neue ersetzt.Das Klickgefühl ist gut und man ein besseres Feedback, genau werd ich es allerdings nach längerer Zeit wissen.Das Set beinhaltet neben passendem magnetischem Schraubenzieher und Sprudger zum öffnen des Steam Decks auch komplette Ersatzsets für Gehäuseschrauben und ein paar interne auch Federn für Trigger und mehr das man sich als Ersatzteile aufbewahren kann.