Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
OPMERKING:
ALLEEN past voor Xbox Series X/S, voor Xbox Core-controller (Model 1914); Niet compatibel met Xbox One andere controllers.
De controller is NIET inbegrepen.
U moet uw controller uit elkaar halen voor installatie, hoge hands-on vaardigheden vereist.
Installatietips:
Installatiemoeilijkheid: hoog
Geduld vereist: hoog
Bekijk de installatievideo zorgvuldig voor de installatie.
Download de installatievideogids op YouTube door te zoeken naar "eXtremeRate Hope Remap Kit for Xbox Series X/S Controller".
Als je problemen ondervindt tijdens het installatieproces, stuur ons dan gerust een bericht.
Het FPC-bord moet worden gesoldeerd en het FPC-bord moet voor het solderen worden vastgezet met dubbelzijdige tape.
Let er bij het solderen op dat u niet aan de Hope-FPC-kabel trekt, de soldeertijd van elk TP-punt is minder dan 1 seconde.
Na het solderen kan het getest worden met het testbord.
Als alle LED's op het testbord niet branden, controleer dan de P2- en TP35-soldeerpunten of u correct soldeert.
Als slechts enkele LED's niet branden, controleer dan de bijbehorende soldeerpunten of u correct soldeert.
Draai de tuimelschakelaar naar rechts, het blauwe lampje gaat branden en ga dan naar de programmeermodus voor de knoppen.
Je kunt het remap-programma tijdens het spel activeren en maximaal 14 knoppen (A, B, X, Y, L3, R3, LT, RT, LB, RB, Omhoog, Omlaag, Links en Rechts) toewijzen aan de terugknoppen.
Inbegrepen pakket:
1* Hope remap board
1* Hope-testerbord
1* Hope-kabel FPC1 & FPC2 & FPC3
1* Opnieuw ontworpen achterkant met batterijklepje
1* Zijhekken links rechts
4* Terug-knoppen
1* Nieuwsgierige tool
1* Kruisschroevendraaier
1* T8h-schroevendraaier
1* T6 schroevendraaier
29* Schroeven
Opmerking: De controller en andere onderdelen zijn niet inbegrepen.
Mike
6 augustus 2025
Smidig installation. Lätt att ändra knappar. Känslan är som original.Rekommenderas!
C. Anderson
22 juli 2025
This kit turned out great once completed. It probably took me an hour total to get it all put together, and that was partially because I also changed out the buttons and faceplate at the same time, and forgot to put a piece back that required nearly full disassembly again.The kit is well designed. All of the electronic pieces are laid out so they kind of "self-align" where they need to go. Following the video online, it was a pretty easy job, though some of the solder joints are very small and close together. Take your time and pay attention to the directions and it will work fine. I also ended up taking the advice I saw from another reviewer where I had an LED test board that was falsely telling me one of the joints was bad. If that happens to you, use the board to diagnose which point, and just make sure it has a solid solder joint and then move on. I'd have spent a lot more time trying to diagnose something that wasn't bad if I hadn't read that other reviewer with the same problem.Once put together, the kit works great. I love being able to re-map buttons on the fly, though I do wish it had a memory with maybe 2 or 3 profiles to switch between for different games. But I have no complaints for the price and function. I'm very impressed with both this kit and the same company's controller shells and could easily see myself buying more of them to customize my other controllers in the future.
ivan
24 juni 2025
ottimo prodotto
Cristian
21 maart 2025
De media kon niet worden geladen.
MyklBlue
28 december 2024
Love this kit!Turn your original SX or SS controller into a pro controller!Does require soldering, but with a good needle nose tweezers and a super cheap soldering iron, I managed to do it no problem with absolutely zero solder skills or experience!Hardest part was desoldering and resoldering the unleaded solder on the rumble motors but with a better soldering iron, ie. one I could control the temp on, this would have been much easier, and is not the kits fault, as this is the controller solder I'm referring to.The soldering required for the kit parts was very easy, and foolproof with the included test board!Also the YouTube install video was so good, I watched it a couple of times while waiting for the kit to arrive, but when I was doing the install, I didn't even need to watch it as the kit is so intuitively designed that the install is super easy and obvious.The only possible con I'd say is, if you are used to pro controllers you might find the button placement a little off. If you prefer 2 fingers each side, the placement is not optimal in my opinion, but this is because the buttons are built in to the controller, and not on the outside, so they have to account for the motors inside the controller, so position is the trade off. However, I actually prefer the placement on this kit, as I can use 1 finger for both buttons on each side. I find this a much easier way to play as more fingers creates more potential for confusion under pressure.Very impressed!Highly recommended!
Aanbevolen producten
Misschien vind je dit ook leuk