Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad
5/5
5 Recensies

Faithfull FAIPRS Piercing Saw (Jeweller's Saw)

6,99€ 13,66€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • The Faithfull Piercing Saw, often called a jeweller’s saw, It is precision made for a specific use. and not for general use.
  • It is fitted with an extremely fine blade and is specifically designed for cutting thin sheet metal up to 1mm thick such as aluminium, copper, brass, gold and silver.
  • The top screw is for getting the length of the frame right to suit the blade. It is not for tensioning the blade.
  • You can tension the blade by fixing the handle end first then as you would use a junior hacksaw put the other end against a bench and close the gap up between the two clamps by 1-2mm then tighten the blade to the other clamp so that when you let go the frame will tension the blade
  • The steel frame is adjustable to accommodate different blade lengths allowing broken blades to be re-used. A lubricant such as beeswax can be used for smooth cutting performance.


Productbeschrijving

Faithfull FAIPRS Piercing Saw (Jeweller's Saw). The Faithfull Piercing Saw, often called a jeweller’s saw, is essentially a smaller version of a coping saw. It is fitted with an extremely fine blade and is specifically designed for cutting thin sheet metal up to 1mm thick such as aluminium, copper, brass, gold and silver.
The steel frame is adjustable to accommodate different blade lengths allowing broken blades to be re-used. A lubricant such as beeswax can be used for smooth cutting performance.
Depth of Bow: 70mm
Blade Length: 130mm (5in)
The top screw is for getting the length of the frame right to suit the blade. It is not for tensioning the blade.
You can tension the blade by fixing the handle end first then as you would use a junior hacksaw put the other end against a bench and close the gap up between the two clamps by 1-2mm then tighten the blade to the other clamp so that when you let go the frame will tension the blade


santino banzato
31 mei 2025
mi sembra un buon prodotto solo il tempo lo confermerà
Frank Martinez
26 maart 2025
Un poco doblado, a ver si puedo enderezar sin dañar, aparte de esto parece bien por el precio. (editado) solucionado.
CosWaTo
1 maart 2025
one of those nice occasions when the item quality was better than anticipated. good sturdy frame, well finished and handle smooth.
Cyrillano de Bolandrac
9 februari 2025
Scie particulièrement petites et lame fournie inutilisable (elle casse par simple pression du doigt)
Edijs Zelcs
9 december 2024
Good price

Misschien vind je dit ook leuk