Festool Filtro principal HF-CT 26/36/48

Works!

Festool CT26 and CT36 dust extractors use a dust bag and a filter. CT 36 AC can use either a dust bag and a filter, or a pastic liner instead of the dust bag when it is used for drywall dust. Festool dust bag is capable of cleaning the air off particles with sizes over 5 microns. All smaller particles are captured by the primary filter. There is only one filter in the unit. CT26 and CT36 ship from the factory with a HEPA filter (pn 498994, $85 until March 31, 2015, $88 starting from April 1, 2015) which captures 99.99% of particles down to the size of 0.3 microns. The autoclean version of CT36 (which is normally used with the Planex, which is Festool's dry wall sander) comes with a different filter which is better suited for violent shaking during autocleaning process. This is this part. It captures 99.97% of particles down to 1 micron in size, and therefore does not meet the HEPA requirements, i.e., is not suitable for removal lead containing dust. It is exactly the same size as the HEPA version, and dimension-wise is fully interchangeable with the HEPA version (pn 498994).If you need a filter for CT 36 AC, and plan to use it with drywall dust and plastic liner, this is your part.If you need a filter for CT26, or for CT36, or for CT36 AC to use it as a regular dust extractor with a regular bag, this is a non-HEPA, lower cost alternative. It is not HEPA-compliant and is not guaranteed to capture dust in the 0.3 to 1 micron size range, but it is less than half price of the HEPA filter. It will fit into your CT26 or CT36 perfectly, just as the HEPA version. However, as long as you will be using this filter, your dust extractor will not be HEPA-compliant and cannot be used for RRP (lead removal) work until you swap the filter to HEPA rated.The way how I think about it - if you are not working with lead containing dust, i.e., if you use it for regular woodworking, then even Festool tools do not capture all dust. Depending on the tool, 1% to 10% of dust still remains outside of vacuum. It is perfectly feasible that the amount of dust which this basic filter would not capture compared to the HEPA version is much less than the small fraction of dust that is left in the air from regular tool operation. Festool dust extractor with this filter is still better (if not way better) than most regular shop vacuums. I like and prefer the best filter available, i.e., HEPA, but if I had to, I can work on my hobby projects with this filter as well.On the other hand, density of particles increases with decreasing particle sizes logarithmically. The difference between 1 um threshold and 0.1 microns threshold may not sound like much, but it translates into a big difference in density of particles which we cannot see (but sometimes can smell). This is why if you have a HEPA filter at hand, and if you use your dust extractor in a small room (e.g., in a garage) go ahead and use the HEPA version. You lungs will thank you for that.

Imbattables les tarifs d amazon filtre conforme à la marque performant pour un aspirateur festool ctm36

Na altura que eu comprei, as imagens eram somente de um filtro de cor branca em tecido igual ao de origem, mas eu recebi um filtro amarelo feito de um material diferente, parece cartão.Agora já têm imagens de filtros amarelos.As medidas são iguais, mas mesmo assim, eu na altura não recebi o produto anunciado.Ainda mantêm uma imagem de um filtro amarelo para quê?

Montato e tutto a posto, ora va meglio.