FosPower Bananenstekker (12 paar / 24 stuks) 24K vergulde bananenstekker voor luidsprekerkabel, wandplaat & meer (12 rood & 12 wit)

Pas op de je niet een schroefje laat vallen 🙃

De producten zijn netjes en op tijd afgeleverd. Ze werken naar behoren.

snelle levering en prima productVerwachting wordt nagekomen

Prima kwaliteit!

Great, works :)

Belangrijke geluidverbetering t.o.v. draadjes in de connecter steken en vast draaien. De verbinding is veel robuuster.

Goed bruikbaar en zien er goed uit

5 st zonder schroefjes.

These FosPower banana plugs work very well. I have used dozens of these great FosPower banana plugs over the years, and they definitely work as advertised. When comparing apples to apples (or bananas in this case....lol), all Banana plugs work virtually the same way, and these banana plugs are no different. Strip speaker wire, unscrew banana plug cover, loosen speaker wire retaining screw(s), insert speaker wire, tighten speaker wire retaining screw(s), screw on banana plug cover, and wallah, a secure/conductive speaker/amplifier wire connector is created. Albeit, some banana plugs require the speaker wire to be splayed over a hollow post, and then they are held down by a screw-on retainer/cover. However, I much prefer these FosPower dual retaining screw type of banana plugs for their speaker wire holding ability.I always use high quality 14 gauge OFC speaker wire with these FosPower banana plugs, and they work perfectly together. I have used these FosPower banana plugs with many different speaker and amplifier brands over the years, including Klipsch, Pioneer, Polk, Denon, Dayton Audio, and Fosi with no problems at all. They just work, and work well. I have never had a FosPower banana plug break, release the speaker wire or short out, in all of the years that I have used them.Yes, these FosPower banana plugs do fit rather tightly into the connectors, at first, on a lot of speaker and amplifier brands/models. However, after the initial "squeeze" the banana plugs will lossen up, and become easier to install and remove. However, they still retain their great holding ability even after the initial squeeze. In order to overcome this initial "tightness," I usually just stick the FosPower banana plugs into a connector of an old portable amplifier, before assembling them, in order to squeeze them before inserting them into their final speaker or amplifier destinations. This is especially useful when working in tight places, where there is not much room to work in order to push the FosPower banana plugs into their tight connections firmly.Overall, I highly recommend these FosPower banana plugs. I am currently using them all over the house and shop for home theater and music listening (and testing projects). Just be aware of the tight fit in some speakers and amplifiers. Also, the 2 very tiny speaker wire retaining screws can be a challenge sometimes. Just use a good standard blade jewelers screwdriver, and be careful not to remove the retaining screws all of the way or over-tighten them. Once these things are mastered, using these FosPower banana plugs becomes second nature. Have fun!

Very good quality.

Excellent. Thank you.

Wirklich wertig anmutende Bananas, die das Kabel gut festhalten und auch ausreichend, aber nicht zu stramm in verschiedene Verstärker von mir passen. Egal ob in Retro oder aktuelle, sehr hochwertige Geräte zB von Accuphase. Gekauft zum testen und häufigeren kontrollieren von Hifi Verstärkern.

Se ven de buena calidad