Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad
5/5
5 Recensies

Freenove 8MP Camera for Raspberry Pi 5 4 B 3 B+ A+ Zero 2 W Jetson Nano with Adjustable Holder and Ribbon Cable, 120° Viewing Angle, 1080P 720P Output

7,99€ 16,95€
Gratis verzending bij bestellingen boven 25,99€

1.Kleur:5mp 62degree


Productdetails

  • Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400, which only supports USB cameras), NVIDIA Jetson Nano Developer Kit / 2GB Developer Kit
  • Detailed Tutorial: Provides step-by-step guide to show you how to use (The download link can be found on the product box) (No paper tutorial)
  • Camera Parameters: 8 megapixels (3280 x 2464 pixels), 120° field of view, 1080p 30fps, 720p 60fps video modes
  • Adjustable Holder: Allows you to easily adjust the camera to the most suitable angle
  • Get Support: Our technical support team is always ready to answer your questions


Productbeschrijving

Belangrijke opmerkingen:
Deze camera is NIET compatibel met Raspberry Pi 400, die alleen USB-camera's ondersteunt.
Overzicht:
Dit is een 8 MP camera met verstelbare houder voor Raspberry Pi en Jetson Nano.
Alleen de verbinding met de camera-poort van je apparaat nodig.
Wij bieden gratis technische ondersteuning om je te helpen met vragen en problemen.
Compatibele modellen:
* Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero
* NVIDIA Jetson Nano Developer Kit / 2 GB Developer Kit
(Opmerking: NIET compatibel met Raspberry Pi 400, die alleen USB-camera's ondersteunt.)
(Opmerking: deze set bevat lintkabels geschikt voor alle compatibele modellen.)
Instructies:
Wordt geleverd met handleiding om te laten zien hoe je het kunt gebruiken. (Download nodig, geen papieren tutorial.)
De downloadlink kan op de productdoos worden gevonden.
Camera-parameters:
* Still resolutie: 8 megapixels
* Sensorresolutie: 3280 x 2464 pixels
* Sensorgrootte: 1/4 inch
* Pixelgrootte: 1,12 × 1,12 µm
* Lens: vaste focus
* Veld van weergave: 120°
* Apertuur: F/2.2
* Video modi: 1080p 30fps, 720p 60fps
Inhoud van het pakket:
1 x camera.
1 x 15 cm lint kabel voor Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ en NVIDIA Jetson Nano
1 x 15 cm lintkabel voor Raspberry Pi 5 / Zero W / Zero
1 x verstelbare houder (hoeft eenvoudig te monteren)
1 x schroevendraaier


Astro
30 juni 2025
Nutze die Kamera mit meinem 3D-Drucker und Octoprint. Läuft tadellos - nachdem ich Octoprint neu installiert habe. Sie wird tadellos erkannt und tut was sie soll, und das für kleines Geld. SD-Card frisch geflasht, alles gut. (Und bei der Gelegenheit gleich mal die alten, nicht mehr aktualisierten Plugins eliminiert.)
Per-Owe Nilsson
22 juni 2025
Bra kvalité
Customer
17 april 2025
Raspbree Pi 4Bでカメラ自動認識しないのでFNK0056B_IMX219_Tutotial_for_JetsonNanoに記載しているように設定したが認識しない、4月９日に購入したFreenove 5MPカメラと入れ替えては自動認識して、問題なく動作する。不良品かも評価星なしです。
Cat
18 maart 2025
I bought this more for the stand than the 5MP camera, as it's hard to find a Raspberry Pi camera module with a stand that allows you to angle the camera. At first I was nervous about purchasing a product without many reviews, but the customer service is fantastic, I emailed on where to find the manual, and the Freenove customer support sent a link to their github repository. Afterwards, I was able to set up the camera stand and camera with no issues. It comes with two ribbon cables, one for the standard Raspberry Pi and one for the Raspberry Pi Zero.The quality of the plastic stand is quite good for the price, and the camera image quality is decent.
Bart
19 december 2024
It took a fair bit of trial and error to get this to work with MotionEye on my Rpi4b. But after 4 different OS I finally got it to work and now that it does, it actually works really well. Camera quality is pretty good for the price.The stand is a bit meh but that's nothing my 3d printer can't fix.If anyone is trying to use it for the same thing, I followed the guide from peppe8o dot com (search: motioneye). After the OS was setup and connected to wifi and ssh was enabled, i was able to do everything else in the guide from a Putty connection on my pc.After that, edit config.txt with:camera_auto_detect=0 (mine was set to 1)and at the end of the file adddtoverlay=imx219Reboot, and then everything worked.

Misschien vind je dit ook leuk