FSA Unisex Orbit Equipe draadloze headset, zwart, 1,1/8-inch

Qualità / prezzo ottime.Funge tutto alla grande

Puesto en una bici de Decathlon, la verdad es que funciona perfectamente, fácil de poner, eso sí hay que hacerse un útil para ello, que con siste en una varilla roscada, 3 tuercas y 2 juegos de arandelas de 2 diámetros, con ese útil, y con cuidado, se pone muy fácil. La verdad es que funciona a las mil maravillas.

Die Bilder ließen vermuten, dass das Lager nur als obere und untere Lagerschalen verkauft wird.Das Lager ist aber mit Kralle und Verschluss-Kappe. Leider lässt die Beschreibung nicht darauf schließen.Außerdem hat es gekapselte Lager.Der Gabel Konus hat eine Schräge von 36°.Als ein paar Eckdaten

Been riding and servicing my own bikes forever. I never thought about headsets much until a bought a new bike which started creaking after a few weeks. I traced it to the headset bearings, and when I looked the issue up I found it was quite common. Solution was to grease and re-adjust the bearings which made sense, as this being a new bike, the bearing may not have been greased properly to start with.So, my new bike had a KING, which are supposed to be one of the best (and most expensive). I was dismayed to find the bearing cage is captive within the cup, and cannot be removed, so I did the best forcing grease in there as best I could. I reassemble the headset, and it was fine.....no more creaking, problem solved!.....or so I thought. 2 weeks later creaking was back again. Repeated procedure. Fine for 2 weeks.This time I ordered another headset from Ritchey. I made sure the bearings could be removed from their cups and serviced this time.Replaced whole headset, and all was fine.....for 2 weeks. Then creaking appeared.....not as bad as with the King bearing, but nevertheless, annoying. I thought maybe I hadn't greased enough, or reassembled correctly, so I went through the procedure again.2 weeks later, creaking was back.Now I had to ask myself why, with all the previous bikes I owned, had I never had this problem. I soon discovered all my other bikes had 'SEALED' cartridge bearing headsets, which brings me to the purchase of this FSA.My order arrived yesterday and I duly replaced the Ritchey headset. Assembly was easy, and what I noticed was I didnt need to torque the preload bolt anywhere near as much as the King or Ritchey to remove play.My first ride on the new bearing and it felt as though I was riding on glass. Steering was smooth and frictionless. All that remains to be seen now is if the creak comes back, but I suspect its cured.So....if anyone else is suffering from an incurable creaking headset, consider sealed cartridge bearings. Both my King & Ritchey were semi open. and from my experience, prone to creaking.

Livré avec étoile cap et vis