Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad
5/5
5 Recensies

Geekworm Raspberry Pi Zero 2 W koellichaam, 10 mm aluminium legering radiator accessoires (C296)

3,99€ 8,00€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • 【Compatibility】C296 is a 10mm aluminum alloy heatsink for raspberry pi zero 2 w, also compatible with raspberry pi zero w by using thermal pads of different thicknesses (1-1.3mm is ok, better to use 1.3mm)
  • 【Heatsink Dimensions】 64x29x10 mm / 2.51x1.14x0.39 inch
  • 【U-shaped Groove Design】C296 adopts a U-shaped groove design to increase the contact area with air, thereby speed up heat dissipation of raspberry pi zero 2 w
  • 【Embedded Design】Embedded installation design allows user for better DIY extension, like applied on M200-K Gigabit Ethernet Expansion Board with Case(ASIN: B09PMQDP6Y), Expansion Board X301(ASIN: B0B1H17SHL) / X302(ASIN: B0B1H9Z4D9) / X303(ASIN: B0B1H7DCC9) / X305(ASIN: B0B775VQFH) / X306(ASIN: B0B77M4Q4M)
  • 【Packing List】1 * aluminum heatsink(C296); 4 * M2.5*8 screws; 4 * M2.5 nuts; 2 * Thermal Pads; 1 x 0.8mm copper sheet


Productbeschrijving

[Overzicht]
C296 is een 10 mm aluminium koellichaam speciaal ontworpen voor raspberry pi nul 2 w.
Deze radiator keurt een U-vormig groefontwerp om het contactoppervlak met lucht te vergroten, waardoor de warmteafvoer van framboos pi nul 2 w versnellen. En het ingebedde installatieontwerp staat gebruiker toe voor betere DIY-uitbreiding.
[Kenmerken]
10mm Ingebed Aluminium Heatsink Compatibel met Raspberry Pi Zero 2 W
U-vormig groefontwerp om warmteafvoer te versnellen
Afmetingen koellichaam: 64x29x10 mm / 2,51x1,14x0,39 inch
Netto gewicht: 18g/0.04lb
[Verpakking lijst]
1 x 10 mm aluminiumlegering heatsink (C296)
4 * M2.5* 8 schroeven
4 * M2.5 moeren
2 x thermische pads
Opmerking: Raspberry Pi Zero 2 W is niet opgenomen in de paklijst.


D.
2 augustus 2025
Il dissipatore viene fornito con due modalità di installazione:- con piastrina di rame, da interporre tra il dissipatore in alluminio e il processore (ATTENZIONE serve pasta termica per cpu NON FORNITA CON IL DISSIPATORE!)- con pad termici adesivi, per usare il dissipatore di alluminio senza piastra di rame.Avendo la pasta termica a disposizione, ho usato il primo metodo...e sono decisamente soddisfatto.Le temperature della cpu sono scese da max 63° a max 52° con la cpu sotto stress costante alla massima velocità (no overclock).La qualità costruttiva è buona, cosi' come la finitura.Molto soddisfatto, lo consiglio.
D. Paul
12 maart 2025
I ran a 30 second, 8 thread, stress test on each unit in the same case design. 17c cooler with the heatsink.The case has air openings but no fans. Overall 10C cooling would be expected. But this one out performs expectations.
Ekrem3428
26 februari 2025
Raspberry pi için iyi bir soğutucu ihtiyacım vardıSoğutması gerçekten başarılı kesinlikle tavsiye ederim
Mescal
16 februari 2025
Je ne pensais pas que mon PiZero2 pouvait chauffer autantCa dissipe bien
milo
9 november 2024
Cools the pi 2 very effectively without the need of a fan. Was reaching temps up to 75°C and now at 50°C max. But used the included copper bit and conductive grease. Fits perfectly.

Misschien vind je dit ook leuk