Genmitsu 3018PROVer V2 Y-as uitbreidingsset, 3018 accessoires upgrade naar 3040, compatibel met 3018PROVer V2 CNC-routermachine

Przepraszam za jakość zdjęć, frezarka prawie codziennie pracuje.Polecam każdemu kto ma CNC 3018 lub CNC 3020.Mam teraz dużo większe pole robocze i dzięki temu mogę robić dużo więcej projektów!Jakość produktu - Dobra.Brak wad.

The bar on the side used to be my max! The extension is definitely worth getting! Thank you Genmitsu!

Der Umbau war einfach. Verlängerung des Tisches funktioniert Problemlos.

I bought this to extend my Genmitsu 3018 Pro Max. I have not seen an extension kit for this model yet. Knowing I would probably have to modify it a little I took a shot. The main modification was for the linear rods. They are 3mm too long. You can cut them off if you have the tools. I did in my lathe. But you could also drill a small relief pocket on the end plate on the inside to make them fit as well. The other modification is for the Carriage mount.The kit comes with 8 holes per side, drilled and tapped into the side rails. the 3018 Pro max only has 6. I used the old rails as a template and drilled and tapped the 6 holes between the other 8 and it works great. I now have a 3040 Pro Max. Next step linear rails on the other axis'.The wiring you will have to figure out for the limit switches on yours. I added them to mine.Good quality kit, for a good price & has all new bolts and a snap in wire cover for the rail slot.

This extends the working area, Its just what I needed to do some longer projects.