Genmitsu KABA Fold CNC-behuizing voor CNC-routermachine, ruisonderdrukking, stofdicht, vlamvertragend, met zijwerkbalk, compatibel met Genmitsu 3020-PRO MAX en V2, 3018-serie CNC, 520 x 475 x 405 mm

Hello, I got the box assembled quickly but the magnetich strips are a disaster. Found some advice to use a hairdryer to heat up the glue and in that case they stick a bit longer but after a few minutes they get loose again. Going to get me some glue to stick them thight. Better add some glue to the package to get those strips fixed.

Only the glue strip is not good enough, despite good cleaning on forehand to maximize glue strip performance

Vraiment top! Réduit le bruit et limite la projection de bois ou autre matériaux. Se monte très facilement et ne prend pas beaucoup de place

ÜRÜN GÜZEL VE KULLANIŞLI. BİR YERDEN BAŞKA BİR YERE MAKİNEYİ MUHAFAZA İLE TAŞIYAMAZSINIZ SEDECE. EN SEVDİĞİM YANI SESİ GERÇEKTEN AZALTMASI (BOŞTA ÇALIŞTIRDIM 45DB KADAR DÜŞTÜ KAZIMA YAPARKEN DENEMEDİM DAHA TAHMİNEN 50-60 DB OLUR SESİN OLMASI VE BİDE ALETLERİ KOYABİLECEĞİM BİR YER OLMASI HOŞUMA GİTTİ.TEK UFAK BİR SORUN KAPAĞIN ARALIKLI KALMASI TAM KAPANMAMASI BUNUN İÇİN MIKNATIS İLE HALLADİLEBİLİR.TALAŞ VB. ARTIKLARIN TEMİZLENMESİ OKADAR ZOR GÖZKMÜYOR.

works great for keeping the dust contained and lowers the noise level a bit. I have had no trouble with the magnetic tape, so far it's holding on just fine

Ok, first of all… I have no idea where they packaged this, but BRAVO! You can tell the company really tried their best to get you the enclosure safe and sound, and kept things organized. All screws, etc… separately bagged for organization and ease of assembly. Following the directions, it took about an hour to assemble. It’s extremely sturdy, as other reviewers have noted about the magnet tape, it’s not the companies fault as it is good quality tape, you can tell it is extremely sticky. I would recommend cutting off the first 1/4in as it wasn’t covered by the backing paper fully to make sure it doesn’t come off later. I would also suggest to wipe the extrusion with alcohol to ensure no oils or contaminates are present before applying. All in all, WONDERFUL product, great price point, and went together very easily. Take your time, and use a multi bit driver to make things easier.

Nicely made enclosure. Precisely cut extrusions, well made hardware and well finished acrylic panels. The only issue was the magnetic tape did not adhere to the aluminium so I used some 12mm heavy duty double sided tape instead.