Winkelwagen is nog leeg.
Winkelwagen is nog leeg.Productbeschrijving
steve
21 juni 2025
Meter turned up next day.If i am honest i have not yet fully tested this out in full, i have however had a few tests in the bag.First impressions are its a chunky meter that has a hard rubber case built in/ onto it.The display is a good size and has a nice back light, the test probes are not fluke grade but will do the job for now.As a service engineer i have a multimeter and a Martindale volt tester, until now i had no insulation tester.However there is one available at work a megger one, that sells for over 400 pounds.Ok so to the tests i have done so far, AC and DC voltage readings seem on par with my other meters.I have also tested the dc voltage out, that are 50v,125v,250v,500v, as yet i have no meter that goes up to 1000v. (all checked out ok)You will see that i have found a case for it on Amazon, more details of it to follow.In my pic you will see 2 elasticated straps covering part of the meter, i may cut those out in the future.Ok now to the insulation testing all be it only a quick test.I found an old 3 phase motor at work that has been left out in the rain and snow for ages, with no top on it.Putting the meter on 100v i hit the test button and it showed a dead short. (it works)In the very near future i will do more tests, and possibly a video.
Customer
27 mei 2025
Great hard case for small items or tools. I'm using it for micro screwdrivers and phone repair pry and pick tools.
Alfred
29 april 2025
Die Box passt hervorragend für mein Wasser-Test-Gerät Pool Lab 2.0. Dieses hochwertige Gerät wird leider mit dem restlichen Zubehör in einen Plastiksack geworfen und geliefert.
Alan Butler
20 februari 2025
Elastic inside for no real purpose and slightly smaller than spcified useful for small screwdrivers and general watch repair tools but I had to cut the handle down on my watch repair hammer for it to fit in.
Item
30 december 2024
Das Hardcase ist brauchbar für mein PeakTech 1040 Multimeter, das an sich deutlich kleiner ist. Allerdings braucht man Platz, wenn man auch zwei Sets Prüfzangen ablegen will, und das Case muss auch eine gewisse Höhe für die Multimeter haben. Daher nach einem Suchen dieses Case, was gut passt, wenn man das Multimeter nochmal etwas mit Schaumstoff umgibt. Einzig die Spannbänder wären praktischer, wenn sie schmaler und symmetrisch verteilt gewesen wären.
Aanbevolen producten