Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Glarks 100 stuks gipsplaten zelfborende ankers met schroeven, koolstofstaal holle muur anker tikken schroef met schroeven kit, geen boor of gaten in de muur

6,99€ 13,99€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • 【Grote hoeveelheid】 Als je een grote hoeveelheid nodig hebt en langdurig gebruik van gipsplaatankers nodig hebt, kan onze set aan je behoeften voldoen, die 100 stuks gipsplaatankers en schroeven bevat, speciaal voor gipsplaat.
  • Snelle installatie: met deze ankers kun je eenvoudig schroeven in gipsplaten rijden. De focus van deze ankers is geconcentreerd en kan snel door de weerstand van de gipsplaat breken. Ze zijn ook zeer sterk en breken niet na het in een schroef rijden.
  • Duurzaam materiaal: deze gipsplaten ankers zijn gemaakt van koolstofstaal, dat een hoge hardheid heeft en grote druk kan weerstaan. Met geel verzinkt op het oppervlak verbetert hun corrosiebestendigheid en verlengt het gebruik en de houdbaarheid.
  • Geen schade: door het platte ontwerp van de ankers veroorzaken ze geen schade aan de gipsplaat. Wanneer u de schroeven en ankers verwijdert, zullen er geen schroefgaten aan de muur zitten. Daarom kunt u de muur hergebruiken of decoreren.
  • Veelzijdig te gebruiken: deze ankers zijn speciaal ontworpen voor gipsplaten en kunnen je helpen om snel schroeven op gipsplaten te installeren. Ze kunnen worden gebruikt om objecten aan de muur te hangen met een maximaal hanggewicht van 65 pond.


Productbeschrijving

Glarks 100Pcs Droog Zelfborende Ankers met Schroeven, Koolstofstaal Holle Muuranker Tapping Schroef met Schroeven Kit, Geen Boor of Gaten in Muur
Specificatie
Producttype: Drywall ankers
Materiaal: Koolstofstaal
Grootte: 12 x 30mm
Hoeveelheid: 100pcs
Producteigenschap
√ Een grote hoeveelheid kit van 100pcs ankers en schroeven kan voldoen aan uw lange termijn vraag voor ankers.
√ De hoofden van de ankers zijn driehoekig en hebben een zigzag ontwerp aan beide zijden, wat het gemakkelijker maakt voor hen om het interieur van de gipsplaat te betreden.
√ Vergeleken met plastic ankers zijn ankers gemaakt van koolstofstaal harder, zodat u zich er geen zorgen over hoeft te maken, zelfs als u een schroef tijdens de installatie aanraakt.
√ Als u de muur wilt hergebruiken, kunnen deze ankers aan uw behoeften voldoen, want nadat u de ankers en schroeven verwijdert, zullen er geen schroefgaten op de muur zijn.
Kwaliteits Assortiment: Als u vragen over onze producten hebt, voel je vrij om ons te verbinden, zullen we ons best proberen om uw problemen op te lossen.


Walter Terzanski
27 juli 2025
Super Produkt würde Ich wieder Kaufen
Ahmad Alrasasi
6 juli 2025
Very easy to use , would difficult recommended it for hanging frames on drywall
B
9 april 2025
Maybe it should be four stars, but now days that's an insult.They are great anchors. That's 5 stars for sure.They're a bit of a bugger to assemble and I had a handful of broken ones. That's 4 stars.
Ken Simmons
10 maart 2025
I purchased these identical hangers from Another Amazon Distributor a couple years ago. I needed more and that Distributor didn't "distribute them" anymore. Having dealt with Glarks before, I had no problem ordering these anchors from them.In short: these (type of) anchors are THE BEST for hanging "light" (i.e., under 20 lbs?) items on drywall panels. The anchors install fairly easily with a hammer, NO "pre-drilling, etc." is required, and the provided screws INSTANTLY and SECURELY go ** STRAIGHT ** into the anchor until seated. They can be installed "horizontally" or "vertically" into the drywall and once the screw is installed, they are EXTREMELY SECURE AND STABLE. Plus, you cannot "over-torque" the screw - once it "bottoms out", it won't go in the anchor any farther AND, since the anchor is made from STEEL, it won't "strip out" or break (unless, of course, you use a PNEUMATIC "IMPACT" DRIVER on the screw! ;) ).Unlike "screw-in" type anchors, they WILL NOT "insert further" into the drywall nor will they "back out" of the dry wall when the screw is removed. If you want to REMOVE the anchor, remove the screw until the "tip" threads are still engaged in the anchor, then carefully PULL the "assembly" from the wall. Unlike "screw-type" anchors, all you'll see is a 1/2"x1/16" "slit" where the anchor was. Slather a "pitifully small" amount of spackle over the "slit", let it dry, sand it down, and you'll never know there was an anchor there. If you DON'T want to remove it, just remove the screw, spackle over the anchor's head, then sand it flat when dry.As an "Extra Added Bonus", removed anchors can likely be REUSED ELSEWHERE (i.e., OOPS! I put it in the wrong place!). Just don't reinstall it within a 1-1/2" "radius" of where it was removed to ensure holding strength!Summary: if you need to Securely Hang "Non-Heavy" Things (i.e., small mirrors, paintings, small shelves, cordless tool holders) on drywall, and you don't want (unsightly?) "round holes" in the drywall from Conventional Anchors, then these are for you!
Udder
11 januari 2025
These fixings are excellent. I prefer to make an initial hole with a bradawl and then hammer them in Gives a really solid fixing.