Godox Grid Softbox Strip Softbox Strip Box Beehive Honeycomb Grid Bowens Halterung für Fotostudio (FW22x90)

Great value for money, Assembly is tricky but a major factor , maybe some instructions might be handy especially for someone buying their 1st softbox, nevertheless very happy with purchase .

Perfect for small product photography. It was very quick and easy to assemble. The only tricky part is inserting the rods into the bracket, but frankly it's not hard. Just slide all four rods through their respective silver loops and then into the pocket at the corners of the box. If it's stiff, push a pen in and wiggle it around to loosen it up. Once all 4 rods are in, identify the appropriate holes, turn the bracket over and mark off where the rods insert. Start with one side, inserting the rods all the way into the bracket. The third and fourth bracket will require a little more force, but not much. Once completed, align the velcro seams and close up the back. Flip the box over. Find the inner diffuser (has little clips), and pull the opening side down along the white hoops inside the softbox so that they clip. If you try pushing these open to clip them on its tough as they are tiny and stiff, it's much easier to slide the hoop in by just pulling the clip across while holding the hoop firmly. Attach the outer diffuser at the lower edge of the velcro, this helps prevent light spillage and allows you to install the grid if you want to use it. Align the short sides first, then gently pull the long sides down, being mindful of wrinkles. Finally, add the grid in the same manner as the outer diffuser, and voila, all done!

Arrivato nei tempi previsti, il softbox risulta essere fatto di una buona qualità. L’ho provato in varie situazioni e posso dire che fa egregiamente il suo lavoro. Ottimo prodotto.

Easy to setup and produces a nice light

Très satisfait du produit, je recommande