Hailege 2.8' ILI9341 240 * 320 TFT LCD Touchscreen SPI Serie 5V / 3.3V Raspberry Pi STM32

Fonctionne sans problème avec un Esp32. Je l'utilise avec la librairie TFT_eSPI.h qui contient tout ce qu'il faut avec une multitude d'exemples. La fonction tactile est sympa, le petit stylet pas nécessaire, ça marche très bien avec le doigt. L'affichage est nickel, mais il vaut mieux être bien en face pour voir une photo, l'angle de vision n'est pas très grand. Je n'ai pas utilisé le lecteur de carte SD intégré, il n'est pas très pratique car les connexions ne sont pas soudées. De toute façon, j'ai déjà un lecteur de carte SD intégré à l'ESP32, inutile d'en avoir un deuxième.

Simple to use SPI bus display. I really love the brightness and the colors of it. I use it for three out of 6 wall terminals for my smart home with Raspberry Pi Zero 2Ws. It was first a bit hard to find an overlay on the internet that works, but if you google for the SKU number, I wrote a little guide to drive this display with an ILI9341 overlay and it works perfectly. Additionally, and probably most important: the display is dimmable with the LED pin over PWM method. I have it in the bed room and need to dim it at night and it works perfectly, almost dimmable to zero, switches fast and has a nice refresh rate. I did not make use of the tough a lot but tested it quickly and it works just fine. It is not a capactive touch display, but still good for my temperature terminals. The display comes in a good quality bare bone package and does fortunately not have the display sides emitting the LED backlight, so it is also easy to case with transparent cases or even no case at all, which makes it quite good looking. Programming is straight forward and also the view angles are a bit better than my other displays. Software support on a website could be good, but you find a lot on the internet to use it as addon display on the SPI bus, or even as framebuffer display, as I do. A very good price/quality ratio!

Confezionamento accurato e consegna veloce.Il display è un TFT discretamente brillante, basato su driver ILI 9341 quindi ampia compatibilità con varie librerie Arduino ed ESP32. Risoluzione effettiva 320x240 e profondità colore di 16 bit.Integra un touchscreen resistivo con driver XPT2046, quindi anche in questo caso ampiamente supportato.L'interfaccia è SPI ed è pensata per avere sullo stesso bus sia il display che il touchscreen (ovviamente su due diversi pin CS). Con cavi corti, il clock SPI può arrivare a 80 MHz (se il microcontroller supporta tale velocità), con prestazioni eccellenti.Alimentazione principale ("Vcc") e retroilluminazione ("LED") funzionano sia a 3.3V che a 5V.Non ho usato (e neanche collegato) il lettore SD integrato.Viene fornito un piccolo pennino di plastica per il touch, che comunque funziona discretamente anche con le dita.Senz'altro consigliato, anche il prezzo è buono.

A good inexpensive display, although of two, one I have has cracked. Handle them with care!

So many different displays around with different drivers, risk this by buying a single display, works perfectly on my Raspberry Pico, so much so, I order another 4I now have 4 displays up and running, connect to Picos, which in turn talk to each other via RS485.I've not tried the touch capabilities as I'm not interested in that, the display is just fine and good size that the Pico can handle (any bigger and you start getting close to the current memory limitations - until the Pico 2 comes out :) )