Winkelwagentje

Winkelwagen is nog leeg.

Winkelwagen is nog leeg.
Op voorraad

Heschen M8 inductieve nabijheidssensor schakelaar, niet-schild type, LJ8A3-2-Z/AX-DC5V, detector 2mm, 5VDC 200mA, NPN normaal gesloten (NC), 3 draad

4,99€ 8,49€
Gratis verzending bij bestellingen boven 25,99€

Productdetails

  • Het werk Voltage: 5VDC; Huidige Output: 200mA
  • Montage gat Diameter: 8mm; Kabellengte: 120cm/48"
  • Het detecteren van Afstand: 2mm±10%; Vastgestelde afstand: 01.6mm
  • Uitgangstype: NPN normaal gesloten (NC); Non-Shield (non-flush)
  • Object detecteren: magnetisch metaal


Productbeschrijving

  • Bescherming van de voedingomkeringsverbinding; kortsluitbeveiliging, kan direct aan PLC verbinden
  • Gebruikt in gemeenschappelijke plaatsen met gemiddelde milieuweerstand
  • Rode LED geeft aan dat het beschikbaar is om de status van de sensor te detecteren
  • Economische en eenvoudige bediening
  • Wijd gebruikt, kan vervanging van min-type schakelaar en grensschakelaar zijn
  • IP 67 bescherming

HTK
10 augustus 2025
When the lift is up enough it engages the winch and stops me from overlifting. It works as expected. My only concern is the longevity as I'm not sure it is rated for weather and moisture, but that is not a problem of the product, rather a problem in my not thinking of that before I purchased this. So far so good!
Jon Allen
2 november 2024
This probe is pretty unique in that it runs off of as little as 5V. This is really great because it means that you can wire it directly to the logic pins of your mainboard/microcontroller without concern of damaging anything. No need for complicated diode/resistor/multiple voltage setups. Just 5v in and job done.